ZKW / 5/T
Swirl flap removal kit for 4.2 V8 TDI engines
Illustrated assembly instructions - available for download in the Additional information tab
the kit enables the removal of the vortex flaps together with The axis from the Suction manifold. Swirl flaps significantly limit the air flow even in the open position, thus providing additional resistance. Это quite important when modifying the engine in terms of increasing power and torque.
техническая информация:
<улей>
свечи made of the same материал as the original vortex flaps and the suction collector, additionally reinforced with glass fiber - PA66 GF35;
no differences in thermal expansion between The collector and the plugs;
automated production process - perfect repeatability of dimensions and банка price;
разработчик: Tafmet.Ли>
улей>
After installation, use a set of adjuster limiters available at our auction or, the swirl flaps from the engine controller so that an error is not displayed on the dashboard.
Application:
VAG 4.2 V8 TDI engines:
Audi:
<улей>
A8 2004-2007, 4.2 TDI, BMC, BVN
A8 2008-2010, 4.2 TDI, BVN
A8 2010-2013, 4.2 TDI, CDSB
A8 2014 ->, 4.2 TDI, CTEC
A8 / S8 quattro 2003-2007, 4.2 TDI, BMC, BVN
A8 / S8 quattro 2008-2010, 4.2 TDI, BVN
A8 / S8 quattro 2010-2013, 4.2 TDI, CDSB
A8 / S8 quattro 2014 ->, 4.2 TDI, CTEC
Q7 2007-2009, 4.2 TDI, БТР
Q7 2010-2015, 4.2 TDI, CCFA, CCFC
улей>
Volkswagen:
<улей>
Touareg, 2011-2017, 4.2 TDI, CKDA
улей>
Porsche:
<улей>
Cayenne, 2012 - & gt;, 4.2 S Diesel, MCU.ДБ
Cayenne, 2014 - >, 4.2 S Diesel, MCU.DC
улей>
Place of installation