Зарядное устройство для 12V / 24V everactive gel batteries

EverActive CBC10 is a universal charger / so-called "intelligent rectifier" for all types of acid batteries (automotive, etc. ) 12V and 24V, gel / AGM. NEW DIGITAL TECHNOLOGY is small size, greater надежность, greater efficiency, greater efficiency, lower electricity энергопотреблением.

the maximum (regulated) charging current for 12V batteries is 10A - 10-20 minutes is enough. зарядка чтобы начать машину с разряженной батареей! Straight from the power industry specialist:

www.everactive.pl 24 months warranty

The charger is intelligent, microprocessor-controlled - when fully charged, it automatically turns off and goes into voltage monitoring mode - 100% safe for each battery The efficiency of our charger is comparable to the charging process in leading professional devices (even many times more expensive) - using an intelligent charger does not adversely affect the operation of the battery, on the contrary, it extends its lifetime!

зарядное устройство предназначено не только для автомобильных аккумуляторов высокой емкости- Спасибо за текущее регулирование зарядки, оно также подходит для гелевых аккумуляторов, аккумуляторных батарей для мотоциклов, используемых на яхтах или батареях для скутеров с небольшой емкостью.

Unlimited possibilities - our charger is equipped with a unique, detachable cable with SAE quick connector. Это позволяет зарядному устройству быть адаптированным к вашей установке без каких-либо проблем, когда включены кабели с зажимами аллигатора и терминалами для глаз

Additional SAE connectors are sold separately .

The charger uses modern solutions:

The CBC 10 charger is designed for 12V / 24V gel, lead-acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid batteries. Charging is automatic, depending on the mode, up to 9 stages! Charging mode, the operation of the chargeris indicated by 13 LEDs .

The first stage is the automatic detection of the battery type (12 / 24V) and its possible reactivation (only for deeply discharged cells) - charging with reduced current.

the second stage is basic charging - depending on the mode, charging current 10A / 5A / 2A (for 24V batteries the maximum current is 5A). The next steps are to control the charging process - as the battery voltage increases, the charging current changes (automatically ограниченный): 10A-7.5 A-5A-4A-3A-2A-1.5 A.

In the final stage of charging, the current is limited to 1.5 A - it is an excellent protection against the phenomenon of "gassing" of the battery. After reaching the voltage of 14.4 V (for 12V batteries) and 28.8 V (for 24V batteries), charging is finished. The last stage is the phase of monitoring the voltage on the battery - if the charger is left connected to the battery for a longer time and the voltage drops to 12.8 V (12V) / 25.6 V (24V), the charger activates 1.5 A trickle charging to prevent the battery from discharging.