300bar PCP Compressor. Automatic High pressure compressor pump with 1800w Air pump< / div > < div class="text" >
технические данные:
модель: Standard (automatic shutdown)
Independent expansion Gas condenser
With water-Oil сепаратор
мощность: 1800 Вт
скорость: 2800 об./мин.
давление: 0-30 МПа
шум: 76db
емкость: 80 л / мин
Compressed series: secondary compression
Suction pressure: atmospheric pressure
Cooling method: water cooled
Lubrication method: splash lubrication
Safety settings: Low / High Pressure Safety valve
Заводское давление: 32mpa
Safety: over-Gas Pressure protection motor overload protection (32mpa automatic exhaust Safety Valve set)
Suitable for: all sizes of high pressure gas cylinders, pipe, valves, high pressure pipes in the range of 6.8 L, suitable for long-term use, good cooling effect, convenient maintenance
Packing List:
1 x PCP воздушный компрессор
1 х водяной насос
1 х водяной шланг
1 x сепаратор масла;
1 x set of sensitive parts
Характеристика:
Copper wire motor, long service life
All metal Inner core ensures durability
Optimized Air duct design with Expansion compensation, fast Air supply
Built-in Heat sink design Water cooling, fast heat dissipation;
головка цилиндра высокого давления с антикоррозийным и антикоррозийным покрытием. Оксидация не является безопасной азартной игрой.
Protection against radiant heat from high pressure cylinders. Reduces high pressure цилиндр core overheating which results in excessive piston wear
взрывозащищенный клапан давления. Когда давление достигает 32 МПа, страховое покрытие давления начнет автоматически.
Reasonable collocation, цилиндр высокого давления циркулирует водяное охлаждение, система принудительного воздушного охлаждения двигателя.
Products are strictly inspected and shipped after inspection. Если в машине просачивается масло, это нормально. Некоторые продукты не были очищены после тестирования.
Внимание:
Please read them carefully before using the air pump
Check that the oil is at the upper limit.
Replace bleed valve.
Connect the water pump and check Water circulation before starting.
the water temperature (450 ° - 650 °) is the most suitable temperature. (Пожалуйста, дышите и выключите 1-2 минуты, когда он exceed 700°)
Use a power adapter with a voltage greater than 220 V / 16 A.
When inflation is over, deflate first, then turn off.