Nanolex Si3D-керамическое покрытие 50 мл

Нанолекс Si3D-это керамическое покрытие, которое чрезвычайно устойчиво к воде, грязи и сильным химическим веществам, благодаря чему оно обеспечивает отличную защиту против грязи.

спасибо Si3D, очистка поверхности становится намного легче и быстрее.

Si3D creates a protective coating with a hardness of 9H, thanks to which the paint is much less prone to scratching.

чтобы дать лучшие результаты, рекомендуется сложить в 2-3 слоя.

coating perfectly protects The paintwork and rims, but also works great on headlights and plastics.

With proper care, durability of the coating is up to 3 years

Application method:

- Before application, the car must be cleaned of dirt, tar, металлические примеси, клей и т. д.

- On such a prepared surface, you should perform a full correction of the paint, and a минимум of "One Step"

- the car should be thoroughly cleaned of polishing paste etc. using specialized preparations of the IPA type

- Each элемент must be degreased three times

4, The last degreasing must be best done with Nanolex EX (spray the element, wait approx. Wipe dry 1-2 minutes)

- We select an area of approx. 40x40cm or a small элемент, distribute The coating accurately with cross movements (up and down)

- Depending on the ambient temperature, we wait 30-180 seconds (at a temperature of 20 degrees Celsius 120 seconds)

- Rub thoroughly with circular movements (we don't reach! ) coating until a uniform appearance is obtained (you can help yourself with an inspection lamp, there should be a minimal голограммы, which will disappear in a dozen or so hours)

- The next layer of coating is applied after 5-15 minutes from the application of the previous layer, in the meantime, to NOT heat up the first layer, degrease etc. (at 20 degrees Celsius, we recommend 10 minutes)

- после завершения процесса применения, мы рекомендуем выйти в дневное время, чтобы убедиться, что покрытие было идеально потерто .

- Initial hardening of the coating takes place after 12 hours at a temperature of 20 degrees Celsius (the car may then come into contact with water), full hardening takes place within 1-2 weeks (after this period, the car can be мытый for the first time).

Емкость: 50 мл