Engine Ford MONDEO IV 2.0 TDCi KLBA LPBA TYBA115KM completely renovated (regenerated)
<улей>
TYBA 2.0 TDCi KLBA LPBA ENGINE
Product Specifications:
<улей>
марка автомобиля: Ford MONDEO IV 2.0 TDCi KLBA LPBA TYBA115KM engine
<улей>
емкость двигателя: 2.0 TDCI
<улей>
Year of manufacture: 2004-2014
<улей>
Engine Code: KLBA LPBA TYBA
<улей>
Mileage: 0 км
< / div > < div class="text" >
область работы, связанная с регенерацией двигателя:
The complete overhaul of the engine takes place in our company (we have our own Machine park, we does not rely on external companies)
<улей>
Replacing the piston rings (NEW)
<улей>
nominal pistons ultrasonically cleaned
<улей>
new head gasket
<улей>
Nominal crankshaft with new bushings
<улей>
Хонинг цилиндр лайнеры
<улей>
Proven head tightness
<улей>
Checking the tightness of the valves
<улей>
Head plane planning
<улей>
New Valve seals
<улей>
New camshaft seals
<улей>
New crankshaft seals
<улей>
Milling valve seats
<улей>
Lapping valves
<улей>
New Piston rings installed
<улей>
Plan the plane of the block
<улей>
Engine without timing gear
<улей>
the engine washed in ultrasound
The highest quality.
Special features:
<улей>
Installed failure-free crank and oil system
<улей>
Replacing the piston rings (new)
<улей>
nominal pistons ultrasonically cleaned
<улей>
new head gasket
<улей>
Nominal crankshaft with new bushings
<улей>
Хонинг цилиндр лайнеры
<улей>
Proven head tightness
<улей>
Checking the tightness of the valves
<улей>
Planning the head plane and the block plane
<улей>
New Valve seals
<улей>
Milling valve seats
<улей>
Lapping valves
<улей>
New Piston rings installed
<улей>
New seals on the timing side
<улей>
the block and all its elements washed in an ultrasonic cleaner
HEAD REGENERATION PROCESS:
<улей>
Inspection and dismantling of valves, measurements of материал hardness, plane coaxiality, head height, valve seat ресесс in relation to the head plane.
<улей>
High temperature bath of the head for many hours for thorough обсаливая and removal of carbon страхования депозитов, washing the head in an alkaline bath (aluminum), cleaning the valves
<улей>
Checking the tightness of the water jacket of the head in The thermal conditions of 90 ° C Engine operation
<улей>
Checking the degree of wear of Valve guides, valves, Valve seats, swirl chambers (diesel engine), camshaft, Keyboard components
<улей>
If necessary - mounting, valve seats, oversized swirl chambers (diesel engine), regeneration of threads - insertion of "helicoil", replacement of valve guides, replacement of injection holders
<улей>
Another control check of the tightness of the water jacket after the treatments
<улей>
Profiling The valve seats by precise machining of three angles of the valve seat simultaneously, according to the factory model specification
<улей>
Valve grinding with maintaining the factory Face angle
<улей>
Planning - grinding of the contact surface of the head with the engine block - an operation that is recommended each time the head is removed from the engine and the gasket is replaced.
<улей>
check the efficiency of Valve springs.
<улей>
Replacement of Valve seals, installation of valves.
<улей>
Adjusting Valve lashings or squeezing oil out of hydraulic regulators.
<улей>
Viber
Telegram
