H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up
The store will not work correctly in the case when cookies are disabled.
H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up
Основні параметри
Докладніше
Стан |
Новий |
Номер за каталогом |
H10-12-19 |
Опис
Reliable converter increasing the voltage (step up) от 12V до 19V 10A 190w
<улей>
input voltage range for correct and stable operation is 11-16v , energy efficiency 95%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
высококачественные медные соединительные кабели
улей><улей>
модель : H10-12-19
Converter type : DC / DC
Voltage change : Step up
типичное входное напряжение [V] : 12
минимум input voltage [V] : 11
Maximum input voltage [V] : 16
Output voltage [V] : 19
Ripple output voltage [MV pp] : 400
Accuracy of the output voltage [%] : 1.5
Maximum output current [a] : 10
рекомендуемый минимум текущего потребления [a] : 0.5
максимальная мощность нагрузки [Вт] : 190
рекомендуемая минимальная мощность нагрузки [Вт] : 9.5
Maximum energy efficiency [%] : 95
Idle current max. [a]: 0.1
line regulation [%] : 0.2
load regulation [%] : 0.2
температура coefficient [% / ° C] : 0.03
Минимальная рабочая температура [° C] : -20
максимальная рабочая температура [° C] : 60
рабочая частота [кГц] : 43
Overload / short-circuit protection for output : Overload shutdown of the инвертор
Thermal protection : Ограниченный the output current after exceeding the max. operating temperature until it cools down
Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
Protection when the voltage exceeds max.Inputs : Output circuit protection
Connection : Integrated cables
Длина кабеля [мм] < /B> : 165
класс Tightness : IP68
Length [mm] : 74
Width [mm] : 74
Thickness [mm] : 31
Distance between the mounting holes [mm] < /B> : 65.1
монтажные отверстия diameter : 5.3
Housing construction : Die-cast aluminum, cross-ribbed
Sealing : epoxy resin
Cooling : Passive / the case acts as a heat sink
Weight [g] : 280
Primary and secondary Side insulation: No-common ground
улей>