H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up

H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up

Что вы ищете?

H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up

В наличии
Код товара:
8873543547
2195,00 ₴
Reliable converter increasing the voltage (step up) от 12V до 19V 10A 190w <улей>
  • input voltage range for correct and stable operation is 11-16v , energy efficiency 95%
  • tightly insulated casing-IP68, additionally perfectly distributes heat
  • solid mounting eyelets for installation in any place of the car or device
  • высококачественные медные соединительные кабели
  • <улей>
  • модель : H10-12-19
  • Converter type : DC / DC
  • Voltage change : Step up
  • типичное входное напряжение [V] : 12
  • минимум input voltage [V] : 11
  • Maximum input voltage [V] : 16
  • Output voltage [V] : 19
  • Ripple output voltage [MV pp] : 400
  • Accuracy of the output voltage [%] : 1.5
  • Maximum output current [a] : 10
  • рекомендуемый минимум текущего потребления [a] : 0.5
  • максимальная мощность нагрузки [Вт] : 190
  • рекомендуемая минимальная мощность нагрузки [Вт] : 9.5
  • Maximum energy efficiency [%] : 95
  • Idle current max. [a]: 0.1
  • line regulation [%] : 0.2
  • load regulation [%] : 0.2
  • температура coefficient [% / ° C] : 0.03
  • Минимальная рабочая температура [° C] : -20
  • максимальная рабочая температура [° C] : 60
  • рабочая частота [кГц] : 43
  • Overload / short-circuit protection for output : Overload shutdown of the инвертор
  • Thermal protection : Ограниченный the output current after exceeding the max. operating temperature until it cools down
  • Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
  • Protection when the voltage exceeds max.Inputs : Output circuit protection
  • Connection : Integrated cables
  • Длина кабеля [мм] < /B> : 165
  • класс Tightness : IP68
  • Length [mm] : 74
  • Width [mm] : 74
  • Thickness [mm] : 31
  • Distance between the mounting holes [mm] < /B> : 65.1
  • монтажные отверстия diameter : 5.3
  • Housing construction : Die-cast aluminum, cross-ribbed
  • Sealing : epoxy resin
  • Cooling : Passive / the case acts as a heat sink
  • Weight [g] : 280
  • Primary and secondary Side insulation: No-common ground
  • Дополнительная информация
    Состояние Новый
    Напишите ваш собственный отзыв
    Вы пишете отзыв на товар:H10-12-19 - Конвертер 12V (11-16V) в 19V 10A step up