Reference number FXKB 41100 55ST

HONDA Map change BUTTON

RFX Race Mapping Button (OEM Replica)

Yamaha YZF450 18-19

код продукта: FXKB 41100 55ST / FXKB4110055ST

Description

RFX Race Series switches

the map buttons on the Rfx Race series are exact OEM spare parts. Complete with the same connectors, adapters, connectors and the exact cable lengths as the original part.

OEM замена

All original connectors are accepted

OEM длина кабеля

Assembly instructions

<улей>

Start by removing the front plastron-plate.

Carefully cut off all cable ties holding the jumper cables and stop switching cables to the rods, then unscrew the клешни and let them hang.

Find the switch connector on your bike, they are often near the headstock on the chassis but sometimes they can be under the tank.

Unclip The connector and remove the switch, noting The wiring run.

Clean the connector with a contact cleaner, such as Maxima Electrical Contact Cleaner.

Loosely attach The new handlebar switch to the desired position.

Route The wires according to the old switch and pinch The connector.

проверьте все соединители в кабелях, повернув стержни к их полному расширению и убедившись, что кабели не будут тянуть слишком плотно, отрегулируйте, если это необходимо.

Reattach кабели привязаны к проводам, если возможно размещение кабелей на задней части стержней, чтобы предотвратить повреждение от перха.

Reinstall the front plastron