PLASTIC WELDER WEP 8858 + MESH PLASTIC NOZZLES

! BUT nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended!

FAN-BLOW SOURCE

SET269

SET CONTAINS:

a set of 5 nozzles in total.

1. round with a diameter of 7 mm
2. round with a diameter of 9 мм
3. square by 12x12 мм
4. + Quick welding nozzle BUT
5. + Reduction nozzle for the but nozzle

The сварщик состояние живых характеризуется is by:

Stock photo on the right

• our nozzle is on the right side of the photo
• please pay attention to the air outlet gap for regulation with minimum Air supply! what the competition doesn't

Set of 5 nozzles

1. round with a diameter of 7 mm
2. round with a diameter of 9 мм
3. square by 12x12 мм
4. + Quick welding nozzle BUT
5. + Reduction nozzle for the but nozzle

• BUT nozzle in the photo on the right
• the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
• The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
улей>

* no binder included

• Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
улей>
• Welding without a but nozzle

• Plastic (JOINT) - ABS triangle with a base (50 grams) about 45 CM long, for welding plastics
• It is a typical материал, used for elements produced in the rotomolding technology, e.g. tanks in small fuel bases, tanks used in agriculture, tanks in sewage treatment plants
• Plastic (JOINT) - PP triangle with a base (50 grams) about 45 CM long, for welding plastics
• general purpose binder
• Automotive
• Industry
• ELECTRONICS HOME APPLIANCES
• Working temperature (depends on the performance of the welder and welding conditions) - 260-330 ° c

Reinforcing mesh - 1 PIECE

Ydimensions

The welding machine comes with an electronic plastic welding guide. это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. после покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.

• the photo shows the construction of the heating element
• Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap

Calculation of the profitability of welding

Typically, the price of the service is calculated based on the type of crack:

for example: in case of a break of a moderately difficult bumper with a length of 70 cm, the purchase is returned after the repair of 2-3 bumpers.