Diesel additive
the benefits you will get by using a fuel conditioner:- Increasing the octane number.
- Improves performance and reduces Fuel consumption. - Regenerates the fuel supply system (pumps, injection devices, carburetors)
- очищает и смазывает компоненты двигателя, чтобы сохранить двигатель чистым.
- Reduces emissions of harmful substances, including Co - когда он систематически используется, он расширяет жизнь головы и двигателя several times.
- One bottle is sufficient for 50 liters of fuel. Ceramizer for the CB-M gearbox
Ceramizer - specially designed for gearboxes, gears and rear axles, it is used as a preparation that allows the regeneration of elements without unnecessary disassembly.
Ceramizer is a much cheaper and easier solution than, for example, repair of a поврежденных gearbox!
After using the preparation, shifting gears will become much easier, in addition, all noises and grinding when shifting gears are eliminated, and it extends the durability of mechanisms, even several times!
CERAMIC-METAL protective layer.
Ceramizers, as the name suggests-operate on the principle of the ceramization process.
этот феномен тесно связан с температурой, которая occurs at the points of friction between metal elements.
For ceramization to take place, four components are needed: (particles of the preparation, metal, oil and high temperature).
After proper application of Ceramizer - The diffusion process takes place,
then the particles of the preparation combine with the metal particles and this is what creates the ceramic-metal layer.
As a result, friction can be reduced, which automatically translates into longer operation of all Vehicle parts.
the use of the preproation improves the crystal structure of the metal mesh. The top layer is hardened
and filled. The layer formed as a result of ceramization eliminates defects caused by friction.
Ceramization technology.
Одним из методов ceramizacji является добавление в систему olejenia минерального дополнение керамики, которая образует на металлических поверхностях , тонкий и очень прочный слой металл-керамической черепицы, которая обладает превосходными свойствами материалов.
cermet coating is created as a result of the adhesion of ceramic building blocks with metal molecules moving in the oil. Процесс благоприятствует селективному переносу свободных металлических молекул, обнаруженных в смазке как результат износа природы фрикции.
These coatings work well as:
- Coatings reducing friction-wherever friction occurs in rotating and reciprocating motion.Ли>
- Anti-corrosion protection-especially important in the case of rarely used or seasoned mechanisms.Ли>
- это некоторые extent also as regenerating coatings for worn surfaces.Ли>
улей>
the set of processes described above protects the places of friction thanks to a smooth cermet coating with high hardness and a low coefficient of friction. Ceramization restores The nominal surface geometry and protects and extends the service life of the system many times over.
Ceramizer for the CB-M gearbox
Ceramizer - specially designed for gearboxes, gears and rear axles, it is used as a preparation that allows the regeneration of elements without unnecessary disassembly.
Ceramizer is a much cheaper and easier solution than, for example, repair of a поврежденных gearbox!
After using the preparation, shifting gears will become much easier, in addition, all noises and grinding when shifting gears are eliminated, and it extends the durability of mechanisms, even several times!
CERAMIC-METAL protective layer.
Ceramizers, as the name suggests-operate on the principle of the ceramization process.
этот феномен тесно связан с температурой, которая occurs at the points of friction between metal elements.
For ceramization to take place, four components are needed: (particles of the preparation, metal, oil and high temperature).
After proper application of Ceramizer - The diffusion process takes place,
then the particles of the preparation combine with the metal particles and this is what creates the ceramic-metal layer.
As a result, friction can be reduced, which automatically translates into longer operation of all Vehicle parts.
the use of the preproation improves the crystal structure of the metal mesh. The top layer is hardened
and filled. The layer formed as a result of ceramization eliminates defects caused by friction.
Ceramization technology.
Одним из методов ceramizacji является добавление в систему olejenia минерального дополнение керамики, которая образует на металлических поверхностях , тонкий и очень прочный слой металл-керамической черепицы, которая обладает превосходными свойствами материалов.
cermet coating is created as a result of the adhesion of ceramic building blocks with metal molecules moving in the oil. Процесс благоприятствует селективному переносу свободных металлических молекул, обнаруженных в смазке как результат износа природы фрикции.
These coatings work well as:
the set of processes described above protects the places of friction thanks to a smooth cermet coating with high hardness and a low coefficient of friction. Ceramization restores The nominal surface geometry and protects and extends the service life of the system many times over.
Viber
Telegram
