1.35.07.015 - HYDRAULIC VALVE FOR THE MOTOR OF THE WRAPPER VAU 1/2 60L

Production:

Original Italian Oleodinamica Marchesini product, символ: VAU OM 1/2"; 1.35.07.015

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

Principle of operation:

The cross-overflow (safety) valve is used to limit the maximum pressure on two inputs of the receiver. It is an ideal protection against sudden Pressure surges and enables setting different pressures on two inputs of the hydraulic system

Designed for smooth braking of hydraulic motors. A very popular valve in wrappers, drilling rigs, augers and others.

Connection:

Connect one side of V1 and V2 to pressure lines E. g. in the hydraulic distributor. Аналоговые выходы на другой стороне V1 и V2 к приемнику подключения портов, E. g. hydraulic motor.

Integration:

он предложил установить два винта, использованных для винта клапана с гидравлическим двигателем. Mounted directly on the hydraulic motor, fits on the BMR, SMR, OMP, BMP motors (рис. ):

Technical data:

Maximum flow: 60 л / мин Number of hydraulic holes in the body: 4 Bolt threads on the motor side: 1/2 " [BSP] Bolt threads on the side of the hydraulic line: M22x1.5 Боди материал: galvanized steel Permissible maximum pressure: 200 bar Factory setting of overflow valves: 130bar Adjustment range of overflow valves: 50 - 200bar Adjustment of overflow valve: 45 бар (per full turn) Weight: 1.150 kg

температурный диапазон и тип масла:

Permissible ambient temperature: -40 C до +60 C Permissible oil temperature: -15 C до +80 C Oil Type: Mineral oil-based hydraulic oil

Hydraulic diagram of the VAU OM valve (рис. ):