1.29.00.0100 - Гидравлический цилиндр поршневой ход 100 мм

1.29.00.0100 - Гидравлический цилиндр поршневой ход 100 мм

Что вы ищете?

1.29.00.0100 - Гидравлический цилиндр поршневой ход 100 мм

В наличии
Код товара:
11345184060
5949,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 1.29.00.0100
Описание
двойной действующий гидравлический цилиндр COMPLETE WITH SINGLE BEARING EARS

Production:

The original product of the Hydrolider brand, manufacturer's символ: 1.29.00.0100; CJ2F 40/22/100 U25

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

привод адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, auras, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.

Recommended in the production of, m.in. сельскохозяйственные машины, grapples, crocodiles, snow plows, power steering and more.

дорогой клиент, PLEASE READ THIS BEFORE CHOOSING YOUR Actuator SUPPLIER:

What you can see in the photo are only the metal parts of the actuator. In fact, an actuator is only as good as the internal seals used in its construction. Мы уверены, что у всех наших цилиндров есть усиленные уплотнения, которые не производятся в Китае и других дальних восточных странах. If you care about quality and durability, choose Hydrolider actuators, which are the only ones that guarantee надежность for years .

General information:

  • Head attachment on the tube side: welded
  • Fixing the head on the rod side: screw-on
  • Гланде (closing cap) type: нитку, screwed into the pipe
  • Rod type (piston rod): хромированный, weldable
  • улей>

    Dimensions:

  • поршень (трубка) внешний диаметр: 50 мм
  • внутренний диаметр поршня (трубки): 40 мм
  • диаметр поршневого стержня (rod): 22 мм
  • Diameter of the bolt holes: 25mm
  • Stroke (working movement) of the piston rod: 100 мм
  • the length at rest measured in the axes of the holes: 310mm
  • Internal threads for connections: M16x1.5
  • улей>

    Work parameters:

  • максимальное разрешаемое рабочее давление: 240 бар
  • Permissible ambient temperature: - 40ºC до + 60ºC
  • Permissible Oil temperature: - 15ºC до + 80ºC
  • тип жидкости: минеральное масло на основе гидравлического масла
  • улей>

    Table showing the change of the pushing-out and pulling-in force of the offered цилиндр depending on the change of oil pressure in the hydraulic system (рис. ):

    CYLINDER SILOWNIK TLOK HYDRAULICZNY SKOK 100mm EAN 2000000270500
    Scroll To Top