1.10.10.023 - 2-SECTION HYDRAULIC DISTRIBUTOR 80L + FLOATING

1.10.10.023 - 2-SECTION HYDRAULIC DISTRIBUTOR 80L + FLOATING

1.10.10.023 - 2-SECTION HYDRAULIC DISTRIBUTOR 80L + FLOATING

В наличии
Код товара:
11924954212
9266,00 ₴
Основные параметры
Дополнительная информация
Состояние Новый
Номер детали 1.10.10.023
Описание
2-SECTION HYDRAULIC DISTRIBUTOR P80 WITH ONE FLOATING SECTION

Production:

Original product of the Badestnost Болгария brand, manufacturer's символ: 02P80 A1L12 GKZ1; символ: 1.10.10.023

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.

Section floating, otherwise free рафтинг, used, m.in. для снегоходов или в турпоходах. Это означает свободное движение поршневого стержня в гидравлических цилиндрах. Это защищает от повреждений элементов, которые находятся в прямом контакте с землей, e. g. ploughshare.

технические данные:

Recommended Oil flow in the system: 0-80 л / мин.

Example of control: two double-acting actuators.

Possibility of serial connection to the existing system (pressure sleeve required).

the first three-position lever (1 - 0 - 2), on a spring, i. e. IT returns to the vertical position by itself:

<улей>
  • Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.
  • Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.
  • Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.

    The second four-position lever (1 - 0 - 2 - 3), three positions (1 - 0 - 2) on the spring (the lever returns to vertical by itself), position (3) floating on the latch (the lever stops in the floating position): 9

    <улей>
  • Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.
  • Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.
  • Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.
  • Position 3, floating with a latch (lever in The forward position), the actuator piston rod is loose, extends and retracts freely under the influence of acting forces.

    On the right, the hydraulic diagram of the distributor:

  • Connection:

    <улей>
  • Pump feed( P1, P2): BSP 1/2 " Female thread
  • Return to the tank (T1, T2): BSP 3/4 " Female thread
  • Sections (A1, A2, B1, B2): BSP 1/2 " Female thread
  • Series connection (N): BSP 3/4 " Female thread
  • диапазон давления:

    <улей>
  • Maximum pressure on the supply: 250bar
  • Maximum pressure on the return: 50Bar
  • Maximum pressure on sections: 300bar
  • overflow valve is factory set at 180bar ± 30 Bar.

    It is recommended to check and set the correct pressure before start-up.

    Possibility of independent regulation, full turn change by 30Bar.

    Oil types recommended by AGRICOLA:

    <улей>
  • rarer high-quality oil: Lotus AGROL BOXOL 26
  • a thicker high-quality oil: FUCHS AGROFARM HYDRATEC HVI 46
  • рекомендуемый диапазон температуры масла:

    <улей>
  • Permissible ambient temperature: -40 C до +60 C
  • Permissible Oil temperature: -15 C до +80 C