Super strong and durable coating-for the most demanding
off-Road Vehicle Body Protection agent
chests of vans and off-road vehicles
trailers of commercial, off-road and towing vehicles
motorhomes
semi-trailers
body panels, Boot interiors, SUV flooring, Wheel arches
Two-component NOVOL COBRA TRUCK BEDLINER BLACK PROTECTIVE COATING
Price for 1 set
600мл bedliner + 200мл hardener
Color: black
COURSE DESCRIPTION:
Cobra Truck Bedliner - protective coating with a structural effect based on 2K polyurethane resins. У него очень высокая механическая прочность и устойчивость к царапинам. Это защищает от погодных условий, бензина, масел, воды и соли. У него есть звук-поглощающие и звукопоглощающие свойства. The surface structure gives an anti-slip effect. In the standard version it is available in black, in the tintable version it allows to obtain any color by adding 10-15% of acrylic or Base paint (we recommend using SPECTRAL 2K or SPECTRAL BASE).
Benefits:
the highest level of protection
stain and scratch resistant surface
for all weather conditions: humidity, high temperatures, frosts, UV radiation, salt water
easy and quick application "ADD - Shake-SPRAY"
the possibility of choosing the thickness of the structure
soundproofing improving Driving comfort
can be used on various surfaces
perfect visual effect
boat hulls
motor boat engines
canoes and oars
сельское хозяйство
agricultural machinery
trailer hitches
plows, spreaders, Fertilizer spreaders
scratch-resistant surfaces
силос
INDUSTRY
work floors
housings, forklifts, trailer interiors
non-slip surfaces
freight wagons
forklifts
concrete mixers, cisterns
ОБРА allows for obtaining a different structure depending on the nozzle and the degree of dilution:
грубой structure - regulated by pressure and distance of the gun from the surface during application with the UBS пистолет,
medium structure - with the addition of 0-5% thinner and application with a conventional gun with a nozzle? 2.5 мм;
fine structure (perfectly имитации пластик) - when adding 25-30% thinner and применение with a conventional gun with a nozzle Ø1.4-1.8 мм.
Application with a roller or brush is also possible. Recommendations for the preparation of the substrate:
disassembly of unnecessary elements,
degreasing with an anti - Silicone remover,
sanding the surface with sandpaper with a градация selected for the substrate: from P120 это Р180,
thorough blowing off the surface to remove loose particles,
degreasing again with an anti - Silicone remover,
маскирует все surfaces, которые не должны быть покрыты защитным покрытием (включая резьбовые отверстия, не удаляемые элементы) с варнишкой и бумагой или фольгой,
application of a layer of anti-corrosion protection (2K etching primer или 2K epoxy primer-grinding the surface with sandpaper, graded from P240 to P320); it is not recommended to apply a protective coating to "голый металл",
in the case of plastics or poorly matted surfaces, it is recommended to use an agent increasing the adhesion,
in the case of uncertain ground, make the so-called thinner тест - if the coating dissolves after wiping with a cloth with a thinner (1K product), remove it,
after proper hardening and preparation of anti-corrosion coatings (matting, blowing off, обсаливая as recommended), apply the COBRA protective coating in accordance with the information contained in the technical data sheet.
< / ol >
Viber
Telegram
