The heater under the dashboard is a type of energy-saving Heater that works the same as the factory cooling system. Горячий воздух из двигателя струился через тепловозное ядро, из выхлопных моторов струился воздух через ядро, и теплый воздух взорвался в пассажирском отсеке машины.Ли>
no Fuel consumption, it can provide more heating power than Battery operated heaters with low energy consumption
улей>
Characteristics:
<улей>
1. Energy-saving heater, can provide more heat output than battery-operated heater with low energy энергопотреблением;
2. Make Full use of hot coolant, works same as engine cooling system, Environmental friendly;
3. High-performance copper tube heating Core helps heat air through the core in seconds
4. A powerful blower motor and 4-hole Air outlets ensure a strong flow of warm air into the passenger compartment
5. Comes with mounting brackets and Speed controller, supports Dashboard installation;
Specification:
<улей>
the color is gray
Optional voltage:12V
блок питания: 8A
материал: медь, железо
Weight: approx. 3 кг
Size: 23 x 21 x 10 см / 9.3 "x 8.5" x 3.9 "
Assembly Required-16mm (5/8 ") ID водяной шланг
Applicable models: trucks, minivans, excavators, harvesters and so on.
улей>
COURSEBOOK:
<улей>
1 、 Make sure that the flow direction is through the cooling system
2 、 Connect the hot coolant hoses to the inlet and outlet of the heater
3 、 Connect the heater and turn it on the vehicle's electrical system
красный провод коммутатора подключен к положительному полю источника питания и нагревателя;
синий провод переключателя подключен к отрицательному полю нагревателя;
черный кабель подключен к отрицательному полю питания;
ВНИМАНИЕ:
<улей>
1. Чтобы установить тепловоз, вам нужно подключить тепловоз к системе охлаждения двигателя
2. It also has a blower that must be connected to the vehicle's electrical system to blow out of warm air;