WELDER PLASTIC WEP 8858 + NOZZLES + NOZZLE BUT + nozzle IRON + LONG CABLE 1m
! BUT nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended! !
! The iron nozzle facilitates The modeling of the weld, smoothing The binder, fusing The reinforcing mesh!
FAN-BLOW SOURCE
Retail offer!
<улей>
The BEST PLASTIC WELDER WEP 8858-I PRODUCT SHOWN IN the PICTURE-OTHER PRODUCERS IMITATE US
X5 NOZZLES with reduction nozzle, BUT nozzle, Iron nozzle
SET142
SET CONTAINS:
<улей>
WEP 8858-я < /B> welder
Support for the hotair stock
a set of 6 nozzles in total
<улей>
round with a diameter of 7 mm
round with a diameter of 9 mm
площадь 12x12 мм
+ 1 reduction nozzle for the but nozzle
+ 1 but nozzle!
+1 железная насадка
* no binder included
Technical specifications:
<улей>
Digitally controlled Air discharge regulation.
Air flow regulation up - 22 л / мин макс.
контроль температуры от 100 ° C до 480 ° C
Power энергопотреблением: 650 ВТ
светодиодный дисплей
Air flow source:fan
Air flow: up составляет 120 л / мин
Blowing type: Soft start brushless fan
Длина кабеля: 1 m
Size: 305x60x60 [length, height width]
Strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)
< / div > < div class= "text" >
BUT nozzle in the photo on the right
the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
Welding without a but nozzle
The iron nozzle is pictured on the right
Used for
<улей>
Оперение reinforcing mesh,
smoothing The weld,
This saves you time on the final processing of the weld.
Nozzle Iron dimensions
<улей>
Fits welders with an outlet diameter of 22 мм
Working surface :triangle with sides 25x20x25 мм
сварочная машина поставляется с электронным пластиковым сварочным гидом. это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. после покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
the photo shows the construction of the heating element
Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap
the photo shows the construction of a heating element covered with mica
Calculation of the profitability of welding
Typically, the price of the service is calculated based on the type of crack:
<улей>
difficult fracture - до 2/10 мм
<улей>
средняя трещина составляет 1.5 PLN / 10 мм
<улей>
- до 1/10 мм
<улей>
other cases of repair of plastic elements according to individual arrangements
for example: in case of a break of a moderately difficult bumper with a length of 70 cm, the purchase is returned after the repair of 2-3 bumpers.
Viber
Telegram
