WELDER PLASTIC WEP 858D + NOZZLES SHOE IRON

! BUT nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended!

! The iron nozzle facilitates The modeling of the weld, smoothing The binder, fusing The reinforcing mesh!

! The Super Nozzle makes welding in hard-to-reach places easier!

SET1056

What are you buying:

Set of 6 nozzles:

1. квадратная насадка12x12 мм
2. Round nozzle with a diameter of7 мм
3. Round nozzle with a diameter of9 мм
4. + Quick welding nozzle BUT
5. + Reduction nozzle for the but nozzle
6. + nozzle iron
7. + Супер nozzle

Plastic welding tutorial

Additional nozzles for the welding machine

BUT nozzle for welding long flat surfaces

Iron nozzle for smoothing The weld and fusing The mesh

Super nozzle for welding, hard-to-reach places

BUT nozzle in the photo on the right

Welding with the BUT nozzle - an additional hole in the nozzle is provided for plastic insertion

Welding without a BUT nozzle

The iron nozzle is pictured on the right

Used for

This saves you time on the final processing of the weld.

Nozzle Iron dimensions

SUPER NOZZLE, лонг бент (length 90mm / diameter of the outlet 5мм) for welding in hard-to-reach places.

The WEP 858D сварщик, is distinguished by a solid, compact housing, thanks to which it takes up little space. Сварочная машина очень прочная. Температура показана на светодиодном дисплее.

The сварщик can repair:

The welder can also be used to repair electrical installations: by shrinking the sleeves.

Along with the welding machine you get a set of nozzles, so you can start working with the device immediately.

Calculation of the profitability of welding

Typically, the price of the service is calculated based on the type of crack:

for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.

The WEP 858D сварщик состояние живых характеризуется is by:

Photo of the flask on the right with nozzles

The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.

A strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)

! ATTENTION !

Heater of an old design with coils burnt out from other manufacturers. Тепловоз был подменен к быстрым коротким схемам и выгоранию.

First run

Place the stock on the holder when you start it. После того, как он поднимется, он начнет работать.

From the top, a holder with a magnetic sensor

Rubber feet