WELDER FOR PLASTIC 853d 120L + Power SUPPLY + NOZZLES

WELDER FOR PLASTIC 853d 120L + Power SUPPLY + NOZZLES

Что вы ищете?

Поиск
Расширенный поиск
Переключить навигацию
Меню
Настройки
Язык
Ru
Валюта
грн
Аккаунт
Моя тележка 0
Подобрать по VIN коду
UA
ПН-ПТ: 8:00 - 19:00
СБ-ВС: 9:00 - 16:00

WELDER FOR PLASTIC 853d 120L + Power SUPPLY + NOZZLES

В наличии
Код товара:
11866176734
6593,00 ₴
Добавить в список желаний Добавить к сравнению
main product photo
Основные параметры
Дополнительная информация
Состояние Новый
Описание
Welder WEP 853d 4in1 (air source, built-in fan) + 11 Nozzles <улей>
  • HOTAIR станция горячего воздуха
  • Грот station - гротов
  • Service power supply
  • Voltage Meter
  • Standard nozzle outlet size-all nozzles fit
  • стандартный 4 мм interchangeable советы.
  • Air source - Fan - blowing strength and stability

    • SET295

    On this listing, you are buying:

    <улей>
  • WEP 853d welder - Air source fan
  • Support for the tip flask with a cleaning sponge
  • Support for the hotair stock
  • шнур питания
  • Grotto Stock with TI tip
  • Cables for the meter

    • Set of 10 nozzles:

    1. Square nozzle with a side of 12 мм
    2. Round nozzle with a diameter of 4.4 mm
    3. Round nozzle with a diameter of 7 mm
    4. Round nozzle with a diameter of 9 мм
    5. Round nozzle with a diameter of 3mm, total height 78mm
    6. Round nozzle with a diameter of 5, total height 78
    7. Round nozzle with a diameter of 8mm, total height 78mm
    8. Long round nozzle at an angle of 3mm / 85mm
    9. Long round nozzle at an angle of 5 мм / 85 мм
    10. Round nozzle with an angle of 8 мм / 85 мм

    Plastic welding tutorial

    Technical data of the WEP 853D WELDERS

    <улей>
  • Robust housing.
  • Processor control high stability of operation, extending the life of heating elements, Energy saving.
  • Remembers The last set temperature .
  • All modules can work independently.

    Hotair пайки iron

    <улей>
  • контроль температуры горячего воздуха от 100-480 [° C]
  • Air flow up to 120 liters / minute [max]
  • температурная стабильность ± 1 ° C
  • светодиодный дисплей
  • Temperature setting using buttons,
  • Smooth regulation of airflow by means of a knob

    • Грот soldering iron

    <улей>
  • Tip temperature control from 200-480 [° C]
  • температурная стабильность ± 2 ° C
  • Earth voltage & lt;2mv
  • сопротивление Земли<2ohm
  • Пайки iron power 60 - the possibility of пайки in lead-free technology (lead free)

    • питания

    <улей>
  • DC 0V ~ 15V выходное напряжение
  • ток до1a
  • LED < /B> digital display of the set voltage
  • Analog current meter from 0A ~ 1A

    • РЧ тестер сигнала

    <улей>
  • Proximity Signal тестер

    • NOZZLES:

    Together with the station, you receive a set of nozzles, so you can start working with the device immediately.

    Set of 10 nozzles:

    1. Square nozzle with a side of 12 мм
    2. Round nozzle with a diameter of 4.4 mm
    3. Round nozzle with a diameter of 7 mm
    4. Round nozzle with a diameter of 9 мм
    5. Round nozzle with a diameter of 3mm, total height 78mm
    6. Round nozzle with a diameter of 5, total height 78
    7. Round nozzle with a diameter of 8mm, total height 78mm
    8. Long round nozzle at an angle of 3mm / 85mm
    9. Long round nozzle at an angle of 5 мм / 85 мм
    10. Round nozzle with an angle of 8 мм / 85 мм

    The welding machine comes with a guide for welding plastic. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством.

    By purchasing this device, we get five devices that can work independently or simultaneously. Как результат, эти устройства занимают меньше места, они более практичны и сохраняют энергию.

    The сварщик is controlled by a dual-core micro-controller, thanks to which the пайки iron and power supply can work independently.

    the device has an automatic cooling system when the station is turned off. Это означает снижение потребления теплового элемента горячей воздушной станции.

    The welder remembers The last set temperature . Both the temperature of the hot air and the soldering Iron.

    Stable and efficient Air exhaust is provided by a brushless fan. Это ensures The durability and reliability of the device.

    Full and smooth regulation of the blowing power, set by means of a potentiometer, temperature is regulated by buttons, all parameters are visible on the LED display.

    The WEP 853d welder is equipped with:

    <улей>
  • горячего воздуха пайки утюги Hotair
  • Tip-shaped пайки айронс
  • Voltage Meter
  • Service power supply 0-15V-1A
    • тестер сигнала РФ

    • Calculation of the profitability of welding

    Typically, the price of the service is calculated based on the type of crack:

    <улей>
  • crack difficult до 2 / 10мм рублей
  • средняя трещина, до 1.5 PLN / 10mm
  • взломать легко до 1 / 10мм рублей
  • other cases of repair of plastic elements according to individual arrangements

    • for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.

    < / div >

    An additional heating element can be purchased at our auctions.

    Connecting the heating элемент

    <улей>
  • Blue and red wires for the Temperature sensor
  • Wire, Wire connecting the heater

    • An additional heating element can be purchased at our auctions.

    Heating spiral made of thick wire wrapped on a ceramic or mica frame . <улей>

  • Red-blue wires and Temperature sensor connection
  • Red wires connecting the heater
    • Power switch
    • Power socket
    Scroll To Top