V-катушка M16 нить ремонтный комплект

M16 V-COIL thread repair kit

Drilling: Use a conventional twist drill to drill The damaged thread. No pre-drilling is required for Spark plug threads; in this case, a drilling and notching tool is used. Please note that larger holes are required for Thread forming.

Inspection: check that the tap and threaded bolts are compatible with thread and pitch.

Thread: Using the special V-COIL tap, cut the thread in the pre-drilled hole. Машинное масло рекомендуется.

Mount the thread insert: place the insert on the tool, making sure that the driving pins are in the grooves of the tap, then adjust with the adjusting ring. Винт в линию с резьбой под давлением. Не поворачивайтесь в противоположное направление, чтобы винт-в направлении, как pin may break.

Journal breakage: after assembly, remove the tool and remove the driving pin with The journal breaker. Для больших размеров и для свечей, соединяющих нити, штифт вытягивается из плит с коническими концами. Tight and accurate tolerances and the forming process result in a thread that is better and stronger than the original thread after these operations are completed.

Application: thread reinforcement in materials with limited shear strength, e.g. aluminum and magnesium alloys, use in machine production, in the automotive, electrotechnical, medical and aviation industries, repairing повреждены or worn threads, re-use of a defective product.

Technical data

Kit contents

Catalog number: DRS-