ZKW / 4 / A
Swirl flap removal kit for 2nd generation 2.0 TDI CR engines with aluminum manifold No. 03L129711EIllustrated assembly instructions - available for download in the Additional information tab
the kit enables the removal of the vortex flaps together with The axis from the Suction manifold. Swirl flaps significantly limit the air flow even in the open position, thus providing additional resistance. Это quite important when modifying the engine in terms of increasing power and torque.
набор разрешает вам заполнять в пустых пространствах, созданных после удаления вихревых клапанов с осью. Each item is made precisely with an accuracy of 0.01 mm on a modern CNC machining center.
After installing the свечи, use the adjuster limiter (set with the limiter available at our auction) or program the swirl flaps from the engine controller so that the error is not displayed on the dashboard.
Application:
All VAG engines (VW, Audi, Seat, Skoda) 2.0 TDI CR 2008-2014 with Aluminum manifold No. 03L129711E:
<улей>Place of installation
Viber
Telegram
