SET of TWO MOTORCYCLE RISERS FOR INCH (2.54 MM) HANDLEBAR
Much better than the substitutes available on the market.
модель: RM-KS-M12 (for Inch handlebars-2.54 mm)
color: chrome
height of the handlebar from the base of the risers: 1.97 inches (50 мм); this is comparable to the height of the handlebars with the factory grips
total height of risers: 3.7 inches (94 mm); height without одеяла is 2,83 человек inches (72 мм); the spikes are unscrewed
suitable for: motorcycle models with M12 bolts (details in the "assembly" section below)
the set includes: 2 risers, 2 винта M12-1.75x60mm
улей>
Details:
chrome: chrome- plated according to cash register 8 (3 stages: copper-plated, nickel-plated and then chrome-plated), this process guarantees durability of the surface and a beautiful gloss
прочный металл
улей>
Additional information:
shipment in 24 hours
guarantee: on the basis of a receipt or invoice
улей>
Why is it worth changing risers:
adjusting the height of the handlebars as needed: Motorcycles use a standard handlebar height. In order to increase the comfort of riding and to get rid of pain in the middle part of the позвоночника resulting from incorrect height of the steering wheel, adjust its height to the rider's height (to find the best height of the steering wheel, reach out your hands and position them in the most comfortable place, then adjust the height of the steering wheel by help of risers).Ли>
quick improvement of appearance: risers will малый the beauty and character of your motorcycle
улей>
the photos show the actual product (photos are the property of our company - All rights reserved).
Dimensions:
согласившись на фото.
Установка:
Each riser consists of 2 main parts (lower and upper) and a detachable spike; in order to put on risers: 1) Unscrew the 2 screws at the top of each riser, which will split the bottom and top part of the riser. 2) Insert the bolt from the bottom of the shelf in the motorcycle by screwing it into the bottom of the riser. 3) Insert The handlebar into the bottom of the riser. 4) Put the upper part of the riser on the handlebar and screw it with two screws located in each of the risers.
Assembly details:
handlebars: risers belong to motorcycle models with an inch handlebars (25.4 мм)
shelves: risers belong to motorcycle models with holes in the shelves for M12 screws (screw thickness: 12 mm
screws M12-1.75x60 mm: The set includes screws 60 mm long (length measured without the screw head), 12 mm thick, with 1.75 metric thread
the depth of the bolt holes in risers: the bolt hole in risers is нитку as much as 37 мм (the shelf in the place where the bolts are mounted must be at least 25 mm thick, otherwise the bolts should be shortened or shorter)
цель: risers are best presented on motorcycles such as: chopper, custom, cruiser, classic
улей>
Examples of motorcycle models with holes in M12 Bolt shelves:
Most motorcycle models: Honda, Yamaha, Suzuki, Victory
Some Kawasaki motorcycle models
улей>
ATTENTION:
из-за разнообразия моделей мотоциклов, пожалуйста, убедитесь, что винты включены в комплект, чтобы соответствовать вашей модели мотоциклов перед покупкой.Ли>
Our other auctions offer risers with M10 bolt holes (with a metric thread: 1.5) and risers for Harley Davidson motorcycles with a 1-2 "-13 thread (only used on Harley-Davidson motorcycles, these bolts are available from us together with the appropriate risers).Ли>
Distinction:
Flat risers with detachable spike, rectangular.
Enjoy your shopping:
Motorcycle shops
Motorcycle showrooms
motorcycle services
wholesalers
individual clients
улей>
ATTENTION:
by sending us a photo after installing the product and agreeing to present the photo to our customers, you will receive an additional functional gift for a motorcycle for free.
(при покупке, please let us know if a photo will be sent, then we will send a gift together with the purchased product. )
At other auctions, we offer a wide selection of motorcycle parts and accessories:
Viber
Telegram
