2-SECTION HYDRAULIC DISTRIBUTOR P40
Production:
Manufacturer'S P / N: 02P40 A1K16 GKZ1
Section floating, otherwise free runoff, used, among others. для снегоходов или в турпоходах. Это означает свободное движение поршневого стержня в гидравлических цилиндрах. Это защищает от повреждений элементов, которые находятся в прямом контакте с землей, e. g. ploughshare.
Technical data:
Recommended Oil flow in the system: 0-40L / min.
Example of control: two double-acting actuators.
Possibility of serial connection to the existing system (pressure sleeve required).
Control:
the first three-position lever (1 - 0 - 2), on a spring, i. e. IT returns to the vertical position by itself:
Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.Ли>
Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.Ли>
Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.Ли>
улей>
The second four-position lever (1 - 0 - 2 - 3), three positions (1 - 0 - 2) on the spring (the lever returns to vertical by itself), position (3) floating on the latch (the lever stops in the floating position): 9
Neutral 0 position( lever set vertically), The Actuator piston rod is stationary - масло идет к переполнению.Ли>
Working position 1 (lever set in a slant forward position), the actuator's piston rod extends.Ли>
Working position 2 (lever set diagonally backwards), The Actuator piston rod retracts.Ли>
Position 3, floating with a latch (lever in The forward position), the actuator piston rod is loose, extends and retracts freely under the influence of acting forces.Ли>
Connection:
Pump feed (P1, P2): BSP 1/2 " Female thread
Return to the tank (T1, T2): BSP 1/2 " Female thread
Sections (A1, A2; B1, B2): BSP 3/8 " internal thread
Series connection (N): BSP 1/2 "Female thread
диапазон давления:
Maximum pressure on the supply: 250bar
Maximum pressure on the return: 50Bar
Maximum pressure on sections: 300bar
The overflow valve is factory set at 175bar
Possibility of independent regulation, full turn change by 30Bar.
A lot of combinations of lever settings - examples
We also offer a complete range of power hydraulics. Насосы, распределители, гидравлические цилиндры, клапаны, гидравлические линии.
Во issue invoices
мы приглашаем вас к сотрудничеству
MORE in ABOUT me