РАСПРЕДЕЛИТЕЛЬ ГИДР. CETOP 1 SEK 60L ELECTRIC 12V

РАСПРЕДЕЛИТЕЛЬ ГИДР. CETOP 1 SEK 60L ELECTRIC 12V

Що Ви шукаєте?

РАСПРЕДЕЛИТЕЛЬ ГИДР. CETOP 1 SEK 60L ELECTRIC 12V

В наявності
Код товару:
10899824132
8133,00 грн
Основні параметри
Докладніше
Стан Новий
Номер за каталогом PLYTA 1 PTD 12V
Опис
ROZDZIELACZ HYDR CETOP 1 SEK 60L ELEKTRYCZNY 12V Part number PLYTA 1 PTD 12V

HYDRAULIC DISTRIBUTOR 1 SEC CETOP 03 NG6

ELECTRICALLY CONTROLLED 12V

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие устройства с гидравлической системой.

технические данные:

the set includes a set of connectors with an m18x1.5 output and a set of 12 DC electric plugs with LEDs.

Recommended Oil flow in the system: 0-60 л / мин.

Example of control: 2-way actuator.

материал:

Distributor body and steel slider, electric свечи and clamping nuts made of plastic, block made of steel or aluminum, depending on the batch.

Control:

a three-position slider (1 - 0 - 2), on a spring, i. e. IT returns to the neutral position by itself after cutting off the power supply. While the spool is in the neutral (0) position, the oil flows freely through the distributor into the return duct, The pump is not working under pressure and is unloaded.

the principle of operation of the slider:

  • Neutral 0 position (текущая подача на обе катушки отключена) привод поршневого стержня стоит - масло идет к переполнению.Ли>
  • Working position 1 (current supply to the first coil only), the Actuator piston rod extends.Ли>
  • Working position 2 (current supply to the second coil only), the Actuator piston rod retracts.Ли>
  • Electricity:

    Power supply direct current (DC) 12V

    Электрические свечи have нем that light up when the coil is под напряжением.

    Connection:

    Pump feed( P1): BSP 3/8 " внутренняя нить

    Return to the tank (T1): BSP 3/8 " Female thread

    Sections (A1, B1): BSP 3/8 " internal thread

    диапазон давления:

    Maximum pressure on the supply: 250bar

    Maximum pressure on the return: 50Bar

    Maximum pressure on sections: 300bar

    The overflow valve is factory set at 175bar

    Possibility of independent regulation, full turn change by 30Bar.

    рекомендуемый диапазон температуры масла:

    Permissible ambient temperature: -40 C до +60 C

    Permissible oil temperature: -15 C to +80 C

    ROZDZIELACZ HYDR CETOP 1 SEK 60L ELEKTRYCZNY 12V Part manufacturer other

    The listing is for the manifold from the description above

    There is a possibility of a different configuration of the solenoid-distributor.

    Во issue invoices

    We also offer a complete range of Power hydraulics. Насосы, распределители, гидравлические цилиндры, клапаны, гидравлические линии.

    мы приглашаем вас к сотрудничеству

    MORE in ABOUT me

    Scroll To Top