1.30.70.004 - Цилиндр, гидравлический цилиндр ход 1-боковой ход 500

1.30.70.004 - Цилиндр, гидравлический цилиндр ход 1-боковой ход 500

Що Ви шукаєте?

1.30.70.004 - Цилиндр, гидравлический цилиндр ход 1-боковой ход 500

В наявності
Код товару:
10598574465
9749,00 грн
Основні параметри
Докладніше
Стан Новий
Номер за каталогом 1.30.70.004
Опис
CYLINDER SILOWNIK HYDRAULICZNY TURA 1 STR SKOK 500 Machine brand Bizon Case IH Claas Deutz Fahr Fendt Ford JCB John Deere Lamborghini Landini Massey Ferguson MTZ Belarus New Holland Renault Same Ursus Zetor other

SINGLE ACTING CYLINDER CYLINDER COMPLETE WITH EARS ON SWINGED BEARINGS

Production:

Original Hydrolider product, manufacturer's symbols: 1.30.70.004; CN 40/500 U25

Application:

it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.

привод адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, auras, cyclops, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие гидравлически контролируемые устройства.

дорогой клиент, PLEASE READ THIS BEFORE CHOOSING YOUR Actuator SUPPLIER:

What you can see in the photo are only the metal parts of the actuator. In fact, an actuator is only as good as the internal seals used in its construction. Мы уверены, что у всех наших цилиндров есть усиленные уплотнения, которые не производятся в Китае и других дальних восточных странах. If you care about quality and durability, choose Hydrolider actuators, which are the only ones that guarantee надежность for years .

General information:

  • Head attachment on the tube side: welded
  • Fixing the head on the rod side: screw-on
  • Гланде (closing cap) type: нитку, screwed into the pipe
  • Rod type (piston rod): хромированный, weldable
  • улей>

    Dimensions:

  • поршень (трубка) внешний диаметр: 60 мм
  • диаметр поршневого стержня (rod): 40 мм
  • Diameter of the bolt holes: 25mm
  • Stroke (working movement) of the piston rod: 500 мм
  • the length at rest measured in the axes of the holes: 740mm
  • Internal thread for connection: M16x1.5
  • улей>

    Work parameters:

  • максимальное разрешаемое рабочее давление: 240 бар
  • Permissible ambient temperature: - 40ºC до + 60ºC
  • Permissible Oil temperature: - 15ºC до + 80ºC
  • тип жидкости: минеральное масло на основе гидравлического масла
  • улей>

    Table showing the change of the thrust force of the offered цилиндр depending on the oil pressure change in the hydraulic system (рис. ):

    CYLINDER SILOWNIK HYDRAULICZNY TURA 1 STR SKOK 500 Weight with packaging 12 7 kg
    CYLINDER SILOWNIK HYDRAULICZNY TURA 1 STR SKOK 500 Part number 1 30 70 004
    Scroll To Top