PLASTIC WELDER + NOZZLES + BOOT + PLASTIC + MESH
+ длинный кабель 1m
! BUT nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended!
! The iron nozzle facilitates The modeling of the weld, smoothing The binder, fusing The reinforcing mesh!
! The Super Nozzle makes welding in hard-to-reach places easier!
FAN-BLOW SOURCE
Retail offer!
<улей>
The BEST PLASTIC WELDER WEP 8858-I PRODUCT SHOWN IN the PICTURE-OTHER PRODUCERS IMITATE US
X7 NOZZLES with reduction nozzle and BUT NOZZLE
PLASTIC ( WELD ) - PP ремень, ABS ремень, PP треугольник, ABS треугольник
NET
SET CONTAINS:
<улей>
WEP 8858-я < /B> welder
Support for the hotair stock
a set of nozzles
<улей>
Round with a diameter of 7 mm
Round with a diameter of 9 mm
площадь 12x12 мм
+ but nozzle
+ Reduction nozzle for the but nozzle
+ nozzle iron
+ Супер Nozzle
Plastic (JOINT) - PP triangle with a base of 4 mm, length about 45 cm (3 pcs.), for welding plastics
Plastic (JOINT) - ABS triangle with a base of 4 mm, approx. 45 см long (3 шт.), for welding plastics
Plastic (JOINT) - PP strip 8mm wide, about 45 cm long (3 pcs.), for welding plastics
Plastic (JOINT) - ABS strip, 8 mm wide, approx.45 см long (3 шт.), for welding plastics
Reinforcing mesh 1 шт.. with dimensions of 20x25 CM
технические характеристики:
<улей>
Digitally controlled Air discharge regulation.
Air flow regulation up - 22 л / мин макс.
контроль температуры от 100 ° C до 480 ° C
Power энергопотреблением: 650 ВТ
светодиодный дисплей
Air flow source:fan
Air flow: up составляет 120 л / мин
Blowing type: Soft start brushless fan
Cable length:1m
Size: 305x60x60 [length, height width]
Strong heater made of thick wire mounted on a frame (greater strength and durability of the heating element)
<улей>
BUT nozzle in the photo on the right
the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
<улей>
Welding with the but nozzle-an additional hole in the nozzle is provided for plastic insertion
<улей>
Welding without a but nozzle
The iron nozzle is pictured on the right
Used for
<улей>
Оперение reinforcing mesh,
smoothing The weld,
This saves you time on the final processing of the weld.
Nozzle Iron dimensions
<улей>
Fits welders with an outlet diameter of 22 мм
Working surface :triangle with sides 25x20x25 мм
SUPER NOZZLE, long, bent (length 90mm / diameter of the outlet 5mm) for welding in hard-to-reach places.
The nozzle fits all plastic welding machines available in our offer.
<улей>
Binder PP Profile strip - 3 pcs.
ABS binder Profile strip - 3 шт.
Binder PP треугольник профиль - 3 шт.
ABS binder треугольник профиль - 3 шт.
технические характеристики:
<улей>
Length: one piece about 45 см
Profiles
general purpose binder
<улей>
Automotive
Industry
ELECTRONICS HOME APPLIANCES
Working temperature (depends on the performance of the welder and welding conditions) - 260-330 ° c
Ширина ремня - 8 мм
a triangle with a base - 4 мм
<улей>
Reinforcing mesh - 1 PIECE, размеры: 20x25 см
<улей>
сварочная машина поставляется с электронным пластиковым сварочным гидом. это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. после покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
<улей>
the photo shows the construction of the heating element
Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap
<улей>
the photo shows the construction of a heating element covered with mica
Calculation of the profitability of welding
Typically, the price of the service is calculated based on the type of crack:
<улей>
difficult fracture - до 2/10 мм
<улей>
средняя трещина составляет 1.5 PLN / 10 мм
<улей>
- до 1/10 мм
<улей>
other cases of repair of plastic elements according to individual arrangements
for example: in case of a break of a moderately difficult bumper with a length of 70 cm, the purchase is returned after the repair of 2-3 bumpers.
Viber
Telegram
