WELDMAN INDUCT 300 INDUCTION HEATER
The INDUCT 300 induction heater is designed for rapid heating of metal elements, perfectly replacing the traditional methods of heating with flammable gases.
By ограниченный the heating zone, it eliminates the risk of damaging the element (painted surface, electric harness, upholstery, rubber cord) and improves work safety.
Indispensable in the automotive industry in workshop and repair works (heating corroded bolts and nuts, hubs, bushings, bearings, exhaust system components, flat sheets, protective strips on the car body и т. д. ) and in the heating and sanitary industry.
EQUIPMENT:
<улей>
многофункциональная ручка 2.5 м (ИНДУКТ 300)
2.1 м шнур питания
vertical induction coil with an internal Helix diameter of 20 мм (cross-section 3 мм)
a horizontal induction coil with an internal Helix diameter of 20 мм (cross-section 3 мм)
vertical induction coil with an internal Helix diameter of 28 мм (5 мм cross-section)
a horizontal induction coil with an internal Helix diameter of 28 мм (5 мм cross-section)
flat induction coil with a diameter of 55 mm (cross-section 3 mm)
Flexible induction coil 92 CM long (cross-section 3 mm)
induction coil for Dent repair (Sheet heating)
улей>
вертикальная / горизонтальная катушка рабочая длина is 80mm (20mm) or 90mm (28mm).
технические данные:
<улей>
код: 106 211
Device type: INDUCT 300
напряжение питания [в]: 230
Power of the supply current [kVA]: 3
Output current [a]: 120
Efficiency: 15% @ 120A
класс защиты [IP]: 21
размеры [см]: 18x29x26
Вес [кг]: 5.6