V-COIL Thread repair kit RAPID 1xd M6x1

Производитель: V-COIL

Thread repair kit V-COIL rapid

Drilling: Drill The damaged thread with the V-COIL rapid twist drill.

Inspection: check that the tap and нитку bolts are compatible with thread and pitch.

Thread: Using the special V-COIL tap, cut the thread in the pre-drilled hole. Машинное масло рекомендуется.

Mount the thread insert: place the insert on the tool and screw it in.Screw in the insert in line with the thread under slight pressure.

Journal разрушения: after insertion, screw out the tool at counterclockwise rotation of the cordless drill and remove the collecting pin with the journal breaker.

Tight and accurate tolerances and the forming process result in a thread that is better and stronger than the original thread after these operations are completed.

Application: thread reinforcement in materials with limited shear strength, e.g. aluminum and magnesium alloys, use in machine production, in the automotive, electrotechnical, medical and aviation industries, repairing повреждены or worn threads, re-use of a defective product.

Поставляется: в кассете из пластика, метчик, сверла в размерах отверстий под резьбу, монтажный инструмент, взломщик шеек с креплением головкой 1/4" , держатель универсальный с правками szybkowymiennymi и вставками для резьбы.

Kit Contents:

1 tap M6;

1 твист дрель бит 6.3 мм;

1 manual Assembly tool with 1/4 " hexagonal drive;

1 журнал breaker;

1 Универсальный держатель;

10 x 1.5 x d thread inserts Kit Contents:

1 tap M6;

1 твист дрель бит 6.3 мм;

1 manual Assembly tool with 1/4 " hexagonal drive;

1 журнал breaker;

1 Универсальный держатель;

10 thread inserts 1.5 x D.

• код производителя: 8216540130
• Size: M6
• Diameter of the hole for the thread: 6.3 mm