Tip stockwith a tip TI model 907A - готов к работе
шнур питания
улей>
Reinforcing mesh - 1 piece, size 20x25 [см]
Set of 5 nozzles:
Round nozzle with a diameter of 5 мм
Round nozzle with a diameter of 7 mm
Round nozzle with a diameter of 9 мм
+ Quick welding nozzle BUT
+ Reduction nozzle for the but nozzle
Plastic (JOINT) - PP triangle with a base (100 grams) about 45 CM long, for welding plastics
Plastic (JOINT) - ABS triangle with a base (100 grams) about 45 CM long, for welding plastics
улей>
Plastic welding tutorial
The WEP 852D + сварщик состояние живых характеризуется is by:
плавный контроль температуры горячего воздуха: 100-480 [°C]
плавный контроль температуры: 100-480 [°C]
LED цифровой индикатор температуры
Blowing air: компрессор
230 В блок питания
размеры: 187x135x245 [мм]
BUT nozzle in the photo on the right
the photos below show an example of how to set up and use the BUT nozzle-nozzle included!
The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set
Welding with the BUT nozzle - an additional hole in the nozzle is provided for plastic insertion
Welding without a BUT nozzle
Plastic (JOINT) - ABS triangle with a base (100 grams) about 45 CM long, for welding plastics
It is a typical материал, used for elements produced in the rotomolding technology, e.g. tanks in small fuel bases, tanks used in agriculture, tanks in sewage treatment plants
Plastic (JOINT) - PP triangle with a base (100 grams) about 45 CM long, for welding plastics
general purpose binder
Automotive
Industry
ELECTRONICS HOME APPLIANCES
Working temperature (depends on the performance of the welder and welding conditions) - 260-330 ° c
Reinforcing mesh for welding plastic.
Perfect for recreating missing elements such as:
handles,
bumpers и т.Ли>
улей>
The mesh can be trimmed as needed.
Reinforcing mesh - 1 PIECE
The reinforcing mesh is made of high-grade steel,
It is covered with a layer of zinc to prevent possible corrosion.Ли>
улей>
Ydimensions
Dimension: 20x25 см
размер сетки: 1.6 мм
Wire Thickness: 0.4 мм
материал: гальванизированный
The welding machine comes with an electronic plastic welding guide
это знакомит вас с вопросами сварки пластмасс в легком пути и делает его легче начать работу с устройством
после покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство
Спасибо
The WEP 852D + сварщик for plastic is a very useful device for everyone who needs to connect plastic elements in a short time. У вельдера был контроль температуры и сила выдуваемого воздуха. Welder additionally equipped with an automatic cooling system after work. Это эффективно расширяет жизнь теплового элемента.
It is most often used for welding elements such as:
headlights,
bumpers,
mirrors,
heater housings,
batteries,
Air conditioning devices,
спойлеры,
gasoline, oil and water tanks
and truck body parts
улей>
You can use the welder to repair electrical installations: by shrinking the sleeves.
The welder has a LED display on which the hot air temperature is displayed
the temperature and airflow power are adjusted by means of knobs
Calculation of the profitability of welding
типично, the price of the service is calculated based on the type of crack:
crack difficult до 2 / 10мм рублей
средняя трещина, до 1.5 PLN / 10mm
взломать легко до 1 / 10мм рублей
other cases of repair of plastic elements according to individual arrangements
улей>
for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.
Rubber feet
Red Shipping bolts , please unscrew before using the device!
a tipped stock marked 907A with a power of 60W 5pin
Connecting the heating element
The blue andred wires are connected to the Temperature sensor (Blue is минус) (Red is plus)
2 leads in a transparent (transparent) sleeve are used to connect the heater
the photo shows the construction of the heating element
heater with a thick wire is wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by gentle tapping
улей>
Connecting the heating элемент
Blue and red wires are for thermocouple connection (Blue is negative) (Red is positive)
Viber
Telegram
