Special fasteners stiffen The panniers and prevent them from being unscrewed from the outside (by unauthorized persons)
<улей>
color: chrome
anti-theft fastenings: thanks to the thread inside the sleeves, the panniers can only be unscrewed from the inside, which additionally protects your luggage
stiffening of the panniers / panniers: after screwing the panniers / panniers to additional handles at the стойки, the stability of the luggage is significantly increased
Mount hole spacing: 16 см (measured between the centers of the holes)
the set includes: 2 frames (right and left), stainless steel mounting screws (4 M8 screws, 6 cm long, stainless steel screws for additional handles (6 M10 screws) with rubber washers
Advantages of the frames we offer:
<улей>
толщина: 10 мм (обеспечивает the stability of panniers)
full bar: instead of pipes, a full bar was used, which significantly increases the strength of the стойки, preventing their deformation
full проникновение welds: разрушения strength (welds not only around but on the entire joint surface)
ss304 болты из нержавеющей стали: высокая твердость по сравнению со стандартными стальными болтами
stable and safe mounting of the panniers / panniers: additional handles stiffening the panniers / panniers
выделено:
<улей>
HONDA VT 750 C SHADOW AERO (2004-2015)
KAWASAKI VN 750 VULCAN (1986-2006)
мотоциклы с 16 см distance between the centers of the holes for mounting racks
NOTE: before purchasing, make sure that the centers of the bolt holes are appropriate
Mounting the pannier / pannier стойки (perspective from the outside):
<улей>
anti-Theft function: The screws can only be unscrewed from the inside of the cases / panniers
luggage stability: thanks to the 3 handles, The cases / panniers will be securely mounted and stable while driving
Additional handles:
<улей>
Solid handles with internal thread
болты из нержавеющей стали M10.
Mounting the pannier / pannier стойки (inside perspective):
<улей>
smooth screw heads: aesthetically сиспользовать after assembly
rubber pads: protection of leather or plastics in cases / стойки
Deviation:
<улей>
20 мм tilting: optimal tilt for the correct positioning of panniers or panniers
the deflection профили starts at the root: the стойки therefore support the panniers with the largest possible surface area
Full проникновение welds:
Welds on the entire joint surface (not only around) ensure higher resistance to stresses.
Dimensions:
<улей>
The optimal dimensions and shape of the стойки provide reliable support for panniers or шины.
a wide range of adjustments and two movable parts allow for optimal positioning of the racks.
Толщина:
10 мм thick frames ensure a stable and safe mounting of panniers.
Mounting screws and bolts for stiffening the panniers / panniers:
Viber
Telegram
