5-SECTION HYDRAULIC DISTRIBUTOR Z50
ELECTRICALLY CONTROLLED 12V
Application:
it is widely used in hydraulic systems in agriculture, horticulture, forestry, construction and broadly understood industry.
распределитель адаптирован к различным типам машин, таким как: сельскохозяйственные машины, тракторы, распылители, повороты, циклопы, HDS loaders, construction machines, loaders, excavators, sweepers, industrial machines и другие устройства с гидравлической системой.
технические данные:
Set of electric plugs included.
Recommended Oil flow in the system: 0-50 л / мин.
Example of control: 2-way actuator.
Possibility of serial connection to the existing system (pressure sleeve required).
Control
a three-position slider (1 - 0 - 2), on a spring, i. e. IT returns to the neutral position by itself after cutting off the power supply. While the spool is in the neutral (0) position, the oil flows freely through the distributor into the return duct, The pump is not working under pressure and is unloaded.
the principle of operation of the slider:
Neutral 0 position (текущая подача на обе катушки отключена) привод поршневого стержня стоит - масло идет к переполнению.Ли>
Working position 1( the supply produces only to the first coil), The Actuator ' s piston rod extends.Ли>
Working position 2( the supply produces only to the second coil), The Actuator piston rod retracts.Ли>
Electricity:
Power supply direct current (DC) 12V
Электрические свечи have нем that light up when the coil is под напряжением.
Connection:
Pump feed (P1, P2): BSP 1/2 " Female thread
Return to the tank (T1, T2): BSP 1/2 " Female thread
разделы (A1, A2, A3, A4, A5; B1, B2, B3, B4, B5): BSP 3/8 " женская нить
Series connection (N): BSP 1/2 "Female thread
диапазон давления:
Maximum pressure on the supply: 250bar
Maximum pressure on the return: 50Bar
Maximum pressure on sections: 300bar
The overflow valve is factory set at 175bar
Possibility of independent regulation, full turn change by 30Bar.
рекомендуемый диапазон температуры масла:
Permissible ambient temperature: -40 C до +60 C
Permissible Oil temperature: -15 C до +80 c
We issue invoices
We also offer a complete range of Power hydraulics. Насосы, распределители, гидравлические цилиндры, клапаны, гидравлические линии.
мы приглашаем вас к сотрудничеству
MORE in ABOUT me
Viber
Telegram
