Пластиковые сварщик, WEP 878D NOZZLES BINDING MESH купити на Avtoex з Польщі в Україні - Львів, Одеса, Запоріжжя, Тернопіль, Харків, Дніпро, Вінниця, Суми, Миколаїв, Чернівці, Маріуполь.

Докладніше
Стан	Новий

< H1>PLASTIC WELDER WEP 878D + NOZZLES + BINDERS + NOZZLE BUT + MESH FAN - BLOW SOURCE <улей>

!! BUT nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended!

!! PLASTIC (JOINT) - PP strap, ABS strap, PP triangle, ABS triangle!

!! Strengthening mesh!

Guide

SET1016

What's included

<улей>

WEP 878D soldering station

Support for the hotair stock

Support for the Arrowhead flask

Tip cleaning sponge

Tip stock with a tip Ti model 907a - готов к работе.
шнур питания

a set of nozzles
<улей>
Round nozzle with a diameter of 7 mm

Round nozzle with a diameter of 9 мм

квадратная насадка 12x12 мм

+ EXTRAS
<улей>
+ nozzle BUT!

+ Reduction nozzle

Reinforcing mesh 1 шт. with dimensions of 20x25 CM
<улей>
Plastic (JOINT) - PP triangle with a base of 4 мм, length about 45 см (3 шт.), for welding plastics

Plastic (JOINT) - ABS triangle with a base of 4 mm, approx. 45 см long (3 шт.), for welding plastics

Plastic (JOINT) - PP strip 8mm wide, about 45 CM long (3 pcs.), for welding plastics

Plastic (JOINT) - ABS strip, 8 мм wide, approx.45 см long (3 шт.), for welding plastics

Welding accessories
The But nozzle for Professional Plastic Welders-facilitates The Binder feeding process-it is recommended

general purpose binder for a quick start to joint cavities, cracks.

Reinforcing mesh for welding plastic. It is ideal for recreating missing elements such as: handles, bumpers, etc.

руководство к знакомству себя с объектом пластиковой сварки

< div class= "image" > < img src="https://a.allegroimg.com/original/116dc5/8225b9cd4d5c876eae008273a10b/Spawarka-Plastiku-WEP-878D-DYSZE-SPOIWA-SIATKA-Brand-Hotair">

BUT nozzle in the photo on the right

the photos below show an example of how to set up and use the but nozzle - nozzle included!

The But nozzle is placed on the round nozzle with a diameter of 9 мм, which is included in the set

Welding with the BUT nozzle - an additional hole in the nozzle is provided for plastic insertion - max dia. 6 мм

Welding without a BUT nozzle

Binder PP Profile strip - 3 pcs.
ABS binder Profile strip - 3 шт.
Binder PP треугольник профиль - 3 шт.
ABS binder треугольник профиль - 3 шт.

технические характеристики:
<улей>
Length: approx. 45 см - 1 шт.
Profiles
<улей>
8 мм wide strip

a triangle with a base of4 мм

ABS BOND

<улей>
Application: It is a typical материал, used for elements produced in the rotomolding technology, e.g. tanks in small fuel bases, tanks used in agriculture, tanks in sewage treatment plants.
точка плавления: 310-360 ° c

The marks you weld: ABS, ABA, ABAK, ABS / PC ABS + PC, ABS / PET, AES, ASA, ASA / PC, SMA, SB
BINDING PP <улей>
Application: It is a typical material for general use in automotive, industry, electronics / household appliances и т. д.
точка плавления: 260-330 ° c

The marks you weld: PS, HIPS, SMA, SB, SAN, PS hard
< / div >
The mesh can be trimmed as needed.
технические характеристики:
<улей>
The reinforcing mesh is made of high-grade steel,

It is covered with a layer of zinc to prevent possible corrosion.
Dimensions
<улей>
Dimension: 20x25 см

размер сетки: 1.6 мм

Wire Thickness: 0.4 мм

материал: гальванизированный

Plastic Welding Guide

The welding machine comes with an electronic plastic welding guide. Это знакомит вас с проблемами сварки пластика в легком пути и делает его легче начать работу с устройством. После покупки, пожалуйста, свяжитесь с нами по электронной почте, чтобы отправить вам руководство. Thank you.
The WEP 878D сварщик has an LED display on which the temperature for hot air is displayed, temperature control by buttons, and airflow power by a potentiometer. Температура в паяльном железе регулируется потенциометром.
Hot air stationhas a sensor in the stock holder , thanks to which, after putting the stock on the plate, the station cools down the heating element and then turns it off (so-called STANDBY mode). Спасибо за это, мы сохраняем энергию, расширяем жизнь тепловозов и увеличиваем рабочую безопасность. After the hotair пайки iron is in standby mode, it can be turned off completely by pressing the button or restarted by lifting the iron.

The station remembers The last set temperature.

Stable and efficient Air exhaust is provided by a fan located in the flask. Вентилятор управляется бесщеточным мотором, который обеспечивает большую прочность и надежность устройства.
The WEP 878D сварщик состояние живых характеризуется is by:
<улей>
Robust and ergonomic housing.
Processor control high stability of operation, extending the life of heating elements, Energy saving.
в режиме Ожидания.
Remembers The last set temperature

230 power supply

Station power 700W

горячий воздух welder:
<улей>
контроль температуры горячего воздуха от 100-480 [° C]

температурная стабильность± 1 [° C]

светодиодный дисплей

стабильность температуры: ± 1 [°C]

Air source: brushless fan

Temperature setting using buttons,

Smooth Airflow regulation by means of buttons,

поток воздуха до 120 букв / минут [Макс]

22 мм Hot Air outlet Head size (Fit all nozzles from PT / aoyue station etc. )
Tip пайки iron:
<улей>
Voltage:220-240V

60W < /B> Peak power

контроль температуры: 200 ° C-480 ° C

система:ESD safe

24V AC output voltage

нагревательный элемент:Керамический

Earth potential at the tip: less than 2mv (type 0.6 mV)

Совет сопротивление земле: меньше, чем 2 ohms

the photo shows the construction of the heating element

Heater with a thick wire, wound on the frame-thanks to this, it is not possible to accidentally short-circuit The wire by a gentle tap

Connection of the HOTAIR heating element
<улей>
Red and blue wires-Temperature sensor connection

Red wires for powering the heating element

Connecting the heating element in the tip flask
<улей>
Red and blue wires-Temperature sensor connection

Wire conductors connecting the power supply to the heating element
< / div >
< / div > < div class= "text" >
набор разрешает вам ремонт:
<улей>
headlamps,

bumpers,

mirrors,

Heater casings,

batteries,

air-conditioning,

спойлер,

petrol, oil and water tanks as well as truck body parts

GSM phones

The welder can also be used to repair electrical installations: by shrinking the sleeves.
the set includes a set of nozzles, staples so you can start working with the device immediately.
Calculation of the profitability of welding

Typically, the price of the service is calculated based on the type of crack:
<улей>
crack difficult up до 2 / 10мм

средняя трещина, up - 1.5 PLN / 10mm

crack easy up до PLN 1 / 10mm

other cases of repair of plastic elements according to individual arrangements

for example: when a bumper cracks 70 cm long, with a medium-difficult crack, the purchase is returned after 2-3 bumpers are repaired.
Спасибо, что у вас есть возможность удаления, маскировки постоянных трещин или сварки пластмасс.