Description:
Charging mode: Low CC, CV, CW, CR basic mode, input or reverse link low voltage protection and alarm, synchronous online operation with multiple loads
High precision and stability: optimized heat рассеянии structure, high power density and digital control mode, higher precision, good stability, RS485, rs232 communication interface, MODBUS protocol.
Protection function: with over-voltage, over-current, power supply, over-temperature protection functions, low-voltage Telemetry function;
Automatic test function: with external I / O trigger signal, PASS, FAIL commands, support for High-power PC software and friendly interface.
Multiple test functions: 10khz Low frequency dynamic test function; Low battery capacity test function; internal resistance test function at Low battery level; Low overcurrent point / time test function; PWM low fan control, power supply, 110vac / 220vac Power switch.
Characteristics:
модель: KP184
Power plug: EU plug
Energy энергопотреблением:
Voltage: AC 110V / 220V ± 10%, 50 ± 2Hz
power consumption: <20W.
Load Input:
Load voltage: DC 1-150V.
load current: 0-40A
мощность нагрузки: 0-400W
Accuracy of measurement:
ток: ± 0.05% + 5 мА
Voltage: ± 0.05% + 5mV
Control Accuracy:
ток: ± 0.05% + 5 мА
напряжение: ± 0.05% + 5mv
метод связи: RS232 / RS485
безопасность:
Overvoltage (OV): greater than 152v idle
Overtemperature (OT): 85 ° C.
Overcurrent (OP): single channel 410w
Power fuse: 0.5 A
Ambient temperature range
0 ~ 500 ℃
ambient humidity range: 10 ~ 90% RH
the DC input terminal of the housing can withstand a voltage of ± 500 VDC
Case Insulation Resistance DC Input: > 20 мкг, 500 В постоянного тока
AC input for Housing insulation resistance: > 20 мкг, 500 В постоянного тока
Size (mm) L × W × H: about 300 × 90 × 190
Размер упаковки: 38.5 * 16 * 27см
Вес: 4.5 кг
Package includes:
1 X электронная нагрузка постоянного тока KP184
1 plug
1 x терминал дистанционного компенсации
2 x positive and negative test connections
1x232 communication cable
2 x тестовый кабель
1 x User Manual