(10-0130)
the kit includes:
<улей>Стан | Новий |
---|
(10-0130)
the kit includes:
<улей>All parts of the set come from the reputable manufacturer of Motip varnishes. Набор разрешений на полный ремонт поврежденного кузова в соответствии с инструкциями ниже. Набор включает в себя лучшие и доказанные продукты, которые используются каждый день тысячами людей, любителями и профессионалами на поле варнишинга.
Remember: The photo above is иллюстративных only, and the color shown on them may отличаются slightly from the actual color. Экраны компьютеров и телефонов могут различить оттенки.
Product description:
the set includes products that are most often chosen by our clients and they are:
<улей>все вариации характеризуются очень хорошим прикрытием, коротким временем сушки и сопротивлением царапинам и непогашенным погодным условиям.
the set size is ideal for repairing Local paintwork damage.
Step 1
Remove rust, loose лак горячей сушки residues. Sand the surface with fine sandpaper
The surface prepared in this way should be clean, dry and free of grease
Step 2 - Use the putty from the kit
In the case of a larger cavity, apply the putty.
After the putty has hardened, Sand off the excess until a smooth transition between the varnish and the repaired item is obtained.
Step 3 - Using a primer лак горячей сушки
If the cavity is deep or if a putty is applied, a primer should be used.
Before применение the primer, secure the adjacent elements with окраски tape and paper.
Apply the undercoat in several thin layers.
Step 4 - Use a base coat
применить a spray Base coat in several thin layers on the prepared surface.
Make sure to keep an appropriate, minimum distance 20cm between the can and the painted элемент
Step 5 - Use of clearcoat and spotblender
in the case of metallic paint :the painted surface should be covered with a colorless varnish after drying.
if there is a difference between the old and the new version of the varnish, use the Spot blender varnish - varnish that levels The transitions.