MOTIP DAEWOO 92u paint repair kit

the set includes products that are most often chosen by our clients and they are:

все вариации характеризуются очень хорошим прикрытием, коротким временем сушки и сопротивлением царапинам и непогашенным погодным условиям.

the set size is ideal for repairing Local paintwork damage.

NOTE: Store in a place not exposed to sunlight and away from other heat sources

Remove rust, loose лак горячей сушки residues. Sand the surface with fine sandpaper

The surface prepared in this way should be clean, dry and free of grease

In the case of a larger cavity, apply the putty.

After the putty has hardened, Sand off the excess until a smooth transition between the varnish and the repaired item is obtained.

If the cavity is deep or if a putty is applied, a primer should be used.

Before применение the primer, secure the adjacent elements with окраски tape and paper.

Apply the undercoat in several thin layers.

применить a spray Base coat in several thin layers on the prepared surface.

Make sure to keep an appropriate, minimum distance 20cm between the can and the painted элемент

in the case of metallic paint :the painted surface should be covered with a colorless varnish after drying.

if there is a difference between the old and the new version of the varnish, use the Spot blender varnish - varnish that levels The transitions.