M5-12 THREAD TAP V-COIL THREAD REPAIR KIT

применение: <улей>

reinforcing threads from materials with limited Shear strength, E. g. aluminum and magnesium alloys,

in the production of machines,

in the automotive, electrotechnical and medical aviation industries,

при ремонте поврежденных или поврежденных нитей, которые позволяют вам повторно использовать дефектный продукт. Kit Contents: <улей>

extractor,

twist drill with the dimensions of the holes for the thread,

tap

thread inserts (1.5 x D).

Supplied in a plastic case,

процесс ремонта резьбы: <улей>

Drilling: Use regular twist drills to drill поврежденных threads. No pre-drilling is required for Spark plug threads; in this case, a drilling and notching tool is used. Please note that larger holes are required for Thread forming.

Inspection: check that the tap and нитку bolts are compatible with thread and pitch.

Thread: Using the special V-COIL tap, cut the thread in the pre-drilled hole. Машинное масло рекомендуется.

Mounting the thread insert: place the insert on the tool, making sure that the driving pins are in the grooves of the tap, then adjust with the adjusting ring. Винт в линию с резьбой под давлением.

не поворачивайтесь против направления винта, pin may break.

Journal breakage: after insertion, remove the tool and remove the driving pin with the скребком breaker. Для больших размеров и для свечей, соединяющих нити, штифт вытягивается из плит с коническими концами.

Tight and accurate tolerances and the forming process result in a thread that is better and stronger than the original thread after these operations are completed.

вес: 2.6 кг.