What is Cera Tec and how to use it?
Cera Tec is an oil additive, a suspension based on a micro-ceramic, solid lubricant (Boron nitride) and a package of wear and tear substances. Cera Tec может использоваться во всех инженерах и передачах. Cera Tec имеет двойной эффект: на одной руке, она создает постоянное механическое покрытие на металлических частях, а на другой, она создает тонкую смазочную пленку, сделанную из пакета противоизносных добавок.
The mechanical action is responsible for creating a durable ceramic layer that builds up dents, царапин and pits in the engine. Спасибо за это лечение, за то, что движок управляет его механической эффективностью. Процесс полной керамизации берет около 7000 километров, но после вождения в течение семи десятков километров, вы можете наблюдать за работой двигателя, увеличивать мощность и сжатие. Equally important, the engine burns less oil and fuel after using Ceratec. Механический слой remains in the engine for up to 50,000 kilometers!
The second active ингредиент in Cera Tec are anti-wear добавки that form a thin additional "фильм" on the surface of the engine to prevent metal-to-metal contact. Этот эффект только длится до тех пор, пока цвет лица не включится в двигатель.
The additive is best poured with fresh oil when changing the oil, and 300 is enough for a maximum of 5 liters of engine oil. The optimal dose is about 6% of the total amount of oil
Cera Tec is fully miscible with all standard engine oils.
LIQUI MOLY CERA TEC is the most modern technology of ceramic protection of each engine. CERA TEC уменьшает фрикцию и износ благодаря чрезвычайно химически и термически стабильным керамическим бондам. Это предотвращает прямой контакт металла с металлом, и это значительно расширяет жизнь двигателя.
"легкий бег" помогает снизить потребление топлива. С любым моторным маслом.
Свойства:
<улей>Application:
Pour directly into the engine или gearbox. One package is sufficient for 5 liters of engine oil (6% of the total Oil capacity), mixing is automatic.
Стан | Новий |
---|