NISSAN X-TRAIL III (T32) FL
год: 2017-
Items included: 2
модель: 49-7432
Производитель: Alu-Frost
During loading, heavy luggage is placed on the inside threshold, which causes царапин. effective solution is the use of a pressed protective cap made of stainless steel.
< / div > < div class= "image" >
the MAIN PICTURE (in WHITE BACKGROUND) IS the PREVIEW PICTURE. Remaining photos of the overlay presented at the auction are real photos, were made on the car for which the overlay был разработан.
The cover is made of полированной нержавеющей стали. Это была двусторонняя, очень сильная клейкая лента.
The covers are perfectly matched to a specific car model. устойчивость к разной погоде и дорожным условиям-влаге, песку, соли. Они являются оригинальными и элегантными дополнениями к любой машине.
Application and features of the rear bumper protective cover:
<улей>
protection against mechanical damage and царапин resulting from loading / unloading luggage,
protection against weather conditions,
gives the car an exclusive character,
очень легко собрать.Ли>
< / div >
The overlay is attached with double-sided tape, which is located on all four edges of the slat.
Attention!
Attach the product carefully, as it will not be possible to improve the assembly once it has attached.
After installing the cover, you can load and remove your luggage with confidence, and the scratched item is now covered with an exclusive accessory.
Installation instructions:
Clean and degrease the surface
Распаковки the overlay and read the attached manual
Without removing the tape securing, try on and carefully mark the place of gluing in order to properly adjust it to the избранный place of installation
Peel off The foil securing the double-sided tape
применить полосу к previously marked place, starting from the top edge
Press The strip down carefully over the entire surface
Ready
Attention!
the action of the adhesive tape is immediate. The optimum temperature for sticking is 10 ° C-30 ° C
* the manual uses an overlay from a different Product series