GAUGE (тестер) FOR Varnish THICKNESS MGR-11-S-Al STEEL AND ALUMINUM
the device automatically detects the type of substrate communicating on the display:
" FE " - for steel and galvanized steel surfaces
"AL" - for aluminum surfaces
- Measurement on steel Yes
- Measurement on galvanized steel Yes
- Measurement on aluminum Yes
- Measurement on curves / ribs No.Ли>
- Probe type On 80 cm cable
- Audio prompt system Yes
- Screen illumination Yes
- Диапазон измерения: 0-1990 мкм
- Measurement resolution: 10 мкм
- встроенный светодиодный фонарик да
- источник питания: 2 x 1.5 V (e.g. LR6)
- Batteries included: Yes
- Alkaline Battery life (hours) 100
MEASURES AUTOMATICALLY
STEEL / GALVANIZED STEEL / ALUMINUM
(не нужно переключаться)
Sound signaling of the number of layers and putty
встроенный фонарик
Coating meter MGR-11-S-AL
Measurement of steel, galvanized steel and aluminum
Sound signaling of the number of layers
the function of freezing the result (HOLD)
Possibility of continuous operation (quick measurement function)
Large, readable backlit screen
Gauge blocks included (simple calibration)
большой диапазон измерения от 0 мкм до 1990 мкм
very comfortable probe on the cable (80 см)
простое измерение в труднодоступных местах
встроенный светодиодный фонарик
Two operating modes: HOLD / CONTINUOUS MODE
Measurement resolution 10um
питание от батареек 2 х АА пальцев (100 ч. work)
Batteries included (2 x 1.5 V Alkaline)
рабочая температура-20 C + 40 C
Polish product
24-месячная гарантия
CE
Large, readable, backlit screen. The backlight works continuously for 15 seconds. после этого времени подсветка автоматически выходит.
Sound signaling of the number of layers and putty
the HOLD function with sound signaling of Layer thickness and putty: (with freezing the measurement result on the screen)
one short beep-suggests original paintwork
two beeps - suggests two layers of лак горячей сушки
one long beep-suggests putty
Coating meter MGR-11-S-AL. Original лак горячей сушки layer - 90 мкм
- one short beep:
Coating meter MGR-11-S-AL. Two layers of 190 мкм лак горячей сушки
- two short beeps:
Coating meter MGR-11-S-AL. Putty spot 870 мкм
- one long beep:
We present sample photos of measurements with the MGR-11-S-AL лак горячей сушки meter
Coating meter MGR-11-S-AL measuring Toyota Avensis II - Original paintwork
Paint meter MGR-11-S-AL measurement of Toyota Hilux - Original paintwork
Paint meter MGR-11-S-AL measuring Audi A4 - Two layers of paint
Coating gauge MGR-11-S-AL Jaguar X-Type car measurement - putty элемент
Viber
Telegram
