Pliers facilitating the shaping of plastic (not for cutting off staples)
a knife
4X set of staples for plastic of various shapes (4x 50 pcs)
улей>
Uses resistance points (staples) for thermal bonding of plastics
it is suitable for repairing and strengthening damaged plastics of various kinds. It works both in repairing everyday equipment and e.g. car elements such as bumpers or dashboards, garden tools housing elements (e.g. lawn mowers).
The set includes staples enabling work with various types of damage - depending on the type of welding, the appropriate shape of the tip should be selected. The set includes staples for works:
internal angular-adapted to connect plastics at angle from the inside
external angular-adapted connect plastics at angle from the outside. Прежде чем использовать его, он может быть легко профилирован, чтобы соответствовать поверхности
simple-thin tip for the least demanding jobs. Slightly wavy
complicated-strongly wavy point for the most demanding connections. Wavy shape provides the strongest bonding force thanks to the largest contact surface with the plastic
Principle of operation:
Mount the selected tip on the device-after pressing the trigger, the tip will start to heat up. После того, как температура приблизилась, совет должен был расплавиться в поврежденном пластике в порядке силы или соединения элементов. Some connections require multiple tips for best efficiency. После слияния и охлаждения вниз, наконечник согнут рукой, без использования инструментов. Он сломается прямо на месте. Не вырезать советы с прикрепленными плоскостями-они используются для пластиков формы.
Technical data:
Power: 230V / 0.5 a
мощность : 50W
Staple heating time: ~ 6 seconds
Spacing of the tips: 14 мм
общая длина: 225 мм
Number of staples in the set: 200 pcs (50X each type)