SET
tec2000 for Cleaning petrol injectors
TEC2000 for Engine flushing
TEC-2000 Fuel Injector Cleaner - многофункциональный, multi-component preparation intended for cleaning injectors in gasoline engines. Продукт не приводит к деградации или повреждению выхлопных систем, оснащенных каталиумными выхлопными газами.
TEC-2000 Engine Flush - one of the most effective preparations for cleaning the inside of the engine, removing carbon страхования депозитов, сут, страхования депозитов и других загрязняющих елементов from working engine components. Спасибо за его использование и видимые эффекты использования, это очень популярно среди пользователей автомобилей и механики.
Set contains:
1. Tec2000 Fuel Injector Cleaner 375ml (for rinsing petrol injectors) - 1 ПК
2. TEC2000 Engine Flush 375ml (for engine flushing) - 1 шт
TEC2000 Fuel Injector Cleaner 375ml:
технические данные:
Application: cleaning injectors in gasoline engines
емкость: 375 мл
Efficiency: 375 мл can is enough for approx. 20 мин. engine operation (rinsing)
Purpose: gasoline engines
улей>
Properties of the preparation:
Cleans injectors and maintains the correct Fuel spray pattern
Maximizes fuel efficiency
IT greatly improves cold and hot Engine starting
Significantly reduces exhaust emissions and "smoothes" idling
Removes and reduces the formation of deposits in the upper part of the цилиндр
Keeps ПВХ и EGR valve (exhaust reduction system) clean
улей>
Long-term effects (with regular use 2 or more times a year):
это позволяет уменьшить или исключить накопление влаги вокруг инжекторов
It обеспечивает cleanliness in the cylinders and prevents partial blocking of the injectors
IT reduces цилиндр wear and reduces the accumulation of sediments in the catalytic converter
Eliminates the characteristic smell of "rotten eggs" from страхования депозитов on the catalyst
улей>
the product can also be used in systems powered by a carburetor.
Tec2000 Engine Flush 375ml:
технические данные:
Application: rinsing and cleaning the engine of carbon страхования депозитов, сут, sediments and other примеси
емкость: 375 мл
Dosage: 375 мл can for 4-5 L of oil
Intended use: diesel, gasoline, Gas-powered engines
улей>
Properties of the preparation:
Increasing the compression (pressure) in the cylinders
Achieving full Oil capacity immediately after changing
Removal of страхования депозитов and carbon страхования депозитов from all internal surfaces of the engine
Removal of страхования депозитов from oil channels and piston ring grooves
Cleaning and silencing of hydraulic Valve lifters
Increased power by releasing stuck piston rings
Neutralization of harmful acids in the oil
Reduction of harmful exhaust emissions
улей>
Situations to use the Tec2000 Engine Flush:
Engine Burning Oil-Dark or blue smoke coming from the exhaust pipe
Seizure of the piston rings-The effect is low compression and oil blowing through the rifle
Valve tappets noises
When the oil change is more than 12 months from the previous oil change or after driving more than 15,000 km
the car drove most of the time in the city
a newly purchased car or engine whose history is unknown
улей>
Tec-2000 Engine Flush дает длительный эффект, однако рекомендуется использовать его в течение года, чтобы сохранить автомобильный двигатель чистым с завода и улучшить его производительность.
Directions for use:
CLEANING INJECTIONS
- Disconnect the fuel lines from the injection rail (supply and return)
- In place of the factory cables, plug in the service hoses for cleaning the injectors and put their Free ends (supply and return) in a box with Tec-2000 Fuel Injection Cleaner.Ли>
- Start the engine-the engine is now running on Tec-2000 Fuel Injection Cleaner. One can, i. e. 375 ml is enough for about 20 minutes of work.Ли>
- когда это может закончиться выключением двигателя.Ли>
- Unplug the service hoses and plug the factory hoses back in.
- the cleaning is completed, but in the event that the effect is partial or the injectors were particularly dirty, it is recommended to repeat the entire operation.Ли>
- After completing the above steps, idle the engine for about 20 minutes.Ли>
Attention:
не используйте на горячем двигателе, он может готовить препарат. Если есть шанс, что система охлаждения двигателя не функционирует должным образом, используйте прерывисто. Использовать с открытым люком двигателя.
In a situation where the operation on injectors, which are particularly contaminated, the work is very uneven, it is recommended that the cleaning process should last about 40 minutes, using 2 x 375 ml of the preparation.
FLUSHING the ENGINE
- TEC-2000 Engine Flush should be used with The standard Oil change.Ли>
- разогреть двигатель и он должен достичь нормальной операционной температуры.Ли>
- добавить препарат к двигателю-все еще к старому маслу.Ли>
- After adding the preparation, the engine should idle for about 10-15 minutes (the car should be in a ventilated room or outside to avoid poisoning by exhaust fumes). Если двигатель имеет проблемы, такие как липкие кольца, uneven compression, increased Oil consumption or black smoke, work with the preparation should last approx. 25-30 minutes before the oil is changed.Ли>
- After this time, слейте старую нефть, установите новый фильтр и заправьте новую нефть.Ли>
the operation of flushing the engine with TEC-2000 Engine Flush is completely safe for the engine.
Viber
Telegram
