H03-12-48 - Конвертер 12V (11-16V) к 48V 3A step up
The store will not work correctly in the case when cookies are disabled.
H03-12-48 - Конвертер 12V (11-16V) к 48V 3A step up
Основні параметри
Докладніше
Стан |
Новий |
Номер за каталогом |
H03-12-48 |
Номери замінних деталей |
1200202-01, H03-12-48, |
Оригінальний номер деталі |
H03-12-48, 1200202-01, |
Опис
Reliable converter increasing the voltage (step up) from 12V to 48V 3A 144W
<улей>
input voltage range for correct and stable operation is 11-16v , energy efficiency 94%
tightly insulated casing-IP68, additionally perfectly distributes heat
solid mounting eyelets for installation in any place of the car or device
высококачественные медные соединительные кабели
- модель : H03-12-48
- Converter type : DC / DC
- Voltage change : Step up
- типичное входное напряжение [V] : 12
- минимум input voltage [V] : 11
- Maximum input voltage [V] : 16
- Output voltage [V] : 48
- Ripple output voltage [MV pp] : 550
- Accuracy of the output voltage [%] : 1.5
- Maximum output current [a] : 3
- рекомендуемый минимум текущего потребления [a] : 0.5
- максимальная мощность нагрузки [Вт] : 144
- рекомендуемая минимальная мощность нагрузки [Вт] : 24
- Maximum energy efficiency [%] : 94
- Idle current max. [a]: 0.1
- line regulation [%] : 0.2
- load regulation [%] : 0.2
- температура coefficient [% / ° C] : 0.03
- Минимальная рабочая температура [° C] : -20
- максимальная рабочая температура [° C] : 60
- рабочая частота [кГц] : 43
- Overload / short-circuit protection for output : Overload shutdown of the инвертор
- Thermal protection : Ограниченный the output current after exceeding the max. operating temperature until it cools down
- Protection against wrong input полярность : Protection of the output circuit (wrong полярность at the input may damage the инвертор)
- Protection when the voltage exceeds max.Inputs : Output circuit protection
- Connection : Integrated cables
- Длина кабеля [мм] < /B> : 165
- класс Tightness : IP68
- Length [mm] : 74
- Width [mm] : 74
- Thickness [mm] : 31
- Distance between the mounting holes [mm] < /B> : 65.1
- монтажные отверстия diameter : 5.3
- Housing construction : Die-cast aluminum, cross-ribbed
- Sealing : epoxy resin
- Cooling : Passive / the case acts as a heat sink
- Weight [g] : 280
- Primary and secondary Side insulation: No-common ground