EPLHM33 - Светодиодные лампы H7 флип чип 12 / 24V Canbus мотоцикл

FLIP CHIP LED - is an innovative LED chip assembly technology that eliminates many disadvantages typical of technologies commonly used on the market:

1 . In a conventional LED hole, significant amounts of heat are dissipated through the front of the LED

2 . In the FLIP CHIP diode, it was possible to remove most of the heat through the substrate, thanks to which the heat Is dissipated in a more efficient way.

Bulb characteristics:

Type: H7

Conventional LED shows high thermal resistance due to the low thermal conductivity of the sapphire substrate.

Significant amounts of heat are emitted from the active layer through the diode front, the инкапсуляции материал and then dispersed in the air.

диод, сделанный вFlip Chip technology разработан на термически проводящей подложке с металлическими соединениями, чтобы создать лучший способ удаления большинства тепла через подложку.

Thanks to this solution, the Light source using FLIP CHIP LED technology is much cooler. Это позволяет вам сопротивляться из-за больших тепловых раковин, и большая свобода в проектировании осветительных решений.

проблема с извлечением света из чипа является металлическим контактом, который obscure part of the light-emiting surface. In classic LEDs , losses associated with the classic method of assembly reach 20%. Эта проблема не связана с флип-чипом, который не использует провода для подключения светодиодных чипов.

Thanks to the use of the latest technology with the use of FLIP CHIP нем, it was possible to design a small bulb (the small core of the bulb allows installation in very small lenses, e.g. in Fiat Punto II, where most of the LED bulbs are too large, at the same time build inside systems that cheat the canbus system in cars (eg. opel insignia does not display burnt bulb error).

High luminous efficiency of FLIP CHIP нем together with high current intensity of 2.45 amps (high beam), 2.20 amps (low beam), at a voltage of 14.4 V allowed us to obtain over 5000lm from one bulb. Small construction, narrow bulb shaft, no external elements (module / driver) allow for much easier installation in most cars than in the case of competitor bulbs.

Нем placed at the same height as the light source in an ordinary halogen bulb, thanks to which we obtained the so-called "cut-off", thanks to which we do not blind anyone while driving on our bulbs.

Included:

Note: Not always the part sold in the auction fits the vehicle, because the periods given above are the production time of a given model, not the time of using the part. Эти периоды не всегда совпадали, и это было не для двух или более типов частей, чтобы быть использованными в одной модели. Please compare the photo from the offer and the technical description contained in the item description with the part installed in your car. - Не надо, пожалуйста, проверять правила применения.