EPLHM33 - Светодиодная лампа H7 для мотоцикла 6000K FLIP CHIP USA

Производитель: Einparts Automotive

Thanks to the use of the most modern technology with the use of FLIP CHIP нем, it was possible to design a small bulb (the small core of the bulb allows installation in very small lenses ). High luminous efficiency of FLIP CHIP diodes together with high current intensity of 2.45 amps (high beam), 2.20 amps (low beam), at a voltage of 14.4 V позволил нам преодолеть 5000lm от одной лампы. Small construction, narrow bulb shaft, lack of external elements (module / driver) allow for much easier installation in most motorcycles than in the case of competitor bulbs. Вы можете удалить его из луковицы, которая часто делает установку очень легкой.

The bulb has so-called "cut-off", so that they not blind drivers from the opposite direction, which is the case with other LED bulbs (be careful when Mount to install the bulb at the right angle).

Specification:

FLIP CHIP LED - is an innovative LED chip assembly technology that eliminates many disadvantages typical of technologies commonly used on the market heat management, light emission, electro-mechanical parameters.

Incompatible with ECE. For off-road use only. Использование в движении по общественным дорогам может привести к штрафу за регистрацию транспортного средства или, в случае столкновения, к потере страхового возмещения.