ROBUST, EFFECTIVE, HOTAIR SOLDER STATION/Hot AIR WELDING MACHINE
SMD WORKSTATION 858D WITH 700W POWER!
STAND - BY and CALIBRATION FUNCTION, LONG WORK thanks TO the BRUSHLESS TURBINE!
Cor Correct variant of the station with a magnetic sensor (not mercury), from a proven manufacturer.
✅ This does not limit the юзабилити of the station when working with the buttstock raised even vertically upwards, which makes it a more universal device, e.g. plastic сварщик.
✅ The Sleep function always works when the stock is placed in the dedicated holder of the station.
The hot air пайки station 858D with a power of 700 ВТ is a compact hotair station for universal use . Станция может быть использована как для пайки в поле электроники, так и для сварки пластмасс . This model of the station is very universal for both hobbyists and advanced users .
The compact housing обеспечивает optimal use of space at the place of use.
the station has:
<улей>
контроль температуры in the range от 100 ° C до 500 ° C
regulation of the blowing power
цифровой дисплей
possibility of temperature calibration
possibility of detaching the stock
улей>
the most popular Hot Air nozzles available on < /b > the market with screw Mount fit into the station.
Model characteristics:
<улей>
solid, light and compact design
high power hotair 700W пайки iron with smooth temperature control in the range of 100-500 ° C
the station enables quick heating to the desired temperature
adjustment of the blowing force of the hotair stock
The hotair flask, after putting it on the holder, automatically cools The heating item down to 100 ° C and goes into standby mode
possibility of quick calibration
hotair blowing using a silent brushless turbine, not a compressor
the station stabilizes the set temperature and maintains it during operation
stock made in ESD Safe technology
LED display showing the temperature at the flask outlet
flexible stock hose increases mobility and comfort of work.Ли>
улей>
The station is additionally equipped with an automatic cooling system after the hotair пайки iron is finished. After putting the stock on the handle, it automatically cools the heater to 100 ° C and then automatically goes into standby mode (the heater is turned off). this extends the life of the heating element . После удаления запасов с держателя снова, станция возвращается к прежним настройкам и нагревает тепловоз к установленной температуре.
Hot air is blown out through a turbine, thanks to which we are sure of long-term, failure-free operation with stable blowing force, and it обеспечивает very quiet operation .
the station has asolid metal housing .
Specification:
<улей>
модель: SMD рабочая станция 858d
напряжение питания: AC220-240V 50/60 Гц
мощность: 700W
поток воздуха
: 120л / мин
контроль температуры: 100-500 ° C
стабильность температуры: ± 1 ° C
вентилятор: brushless
уровень шума: & lt;45db
flask длина трубки: 1.2 м
stock length: 19cm
dimensions: 10x13. 8x15cm
Quick Temperature Calibration Процедуру:
<улей>
While turning on the device with the power switch, hold down the temperature increase button at the same time
the station will enter the calibration mode
with the buttons for temperature control you can decrease or increase the temperature by 100 ° C
after calibration, after a few seconds, the stationбудет автоматически переключаться на нормальный режим работы .Ли>
Spare parts for this model such as a heater, hotair stock, can be found in our offer .
Our offer also includes a wide selection of hotair nozzles.
The kit includes:
<улей>
soldering station 858d
сменные насадки hotair: 5 мм, 8 мм, 10 мм
шнур питания
User manual
You need other пайки or service accessories - check out our other auctions.