Стан | Новий |
---|
Стан | Новий |
---|
Thanks to its unique structure, Ceramic Pro Light creates a coating on the лак горячей сушки based on a nanoparticle ceramic network. Машина в этом пути оставалась чистой для более длительного периода времени, и ее очистка была более простой и быстрой.
the product protects against:
<улей>Directions for use:
Attention! Only the correct preparation of the vehicle will guarantee us excellent durability and amazing properties of this coating.
Before применение, clean the лак горячей сушки perfectly with clay, and finally polish it manually or механически with Ceramic Pro Nano Polish.
Nano polish can be applied manually with an applicator or mechanically with a soft sponge.
the product cleans The varnish and we apply it in small batches, then it should be polished immediately (не оставляйте его сухим)
Ceramic Pro Light-we apply one panel each crosswise using the applicator included in the package.
Leave for 1-3 minutes and quickly wipe with a delicate microfiber. (we recommend having 2-3 microfibers on hand)
после того, как он применил его к entire car, подождите менее 45 минут и нанесите еще один слой. (at least 3 layers, we recommend covering the car with 4 layers)
After application, the car should remain in a warm room for least 8 hours. Машина не должна быть вымыта в течение следующих 7 дней.
For Ceamic Pro Light maintenance, we recommend using Ceramic Pro Sport once a month or Smart One or Smart Detail
50 мл bottle
Store at 5-30 ° C. Shelf life 2 years in the original, closed packaging.
We recommend applying at least 3 layers of ceramic Pro light at intervals of 1 hour.