STAG 200 GoFast панель управления-только компьютер / ЭБУ
the main idea of the controller is an intuitive system with great emphasis on quick and easy installation, where the number of built-in functions is fully compatible with the operation of most cars. Univerality of the controller is also emphasized by the number of car groups it is aimed at, that is: sequence, half-sequence, full group.
Функциональность:
new, intuitive operating program on the PC with clear display of parameters
Simple Controller calibration,
New hardware platform based on a 32 bit processor,
possibility of expansion with new Software functions,
способность запускать приложение без водителя в демо-режиме,
control unit with built-in buzzer with упрощенный assembly method - only 3 wires are required for connection.Ли>
new compact plastic Housing working
in temp. -40…. + 140 ° C, сопротивление влажности, количество соединительных кабелей является минимальным.Ли>
STAG 200 GoFast does not require an ignition switch signal, which significantly shortens the installation time. Simplifications also been introduced when calculating RPM based on Injection times-нет необходимости подключать кабель
with rotation pulses. Подключение коммутатора также стало простым, так как оно ограничено только 3 проводами сборки.
Ease of Calibration:
all functions are placed on two panels and there is no need to switch between tabs,
built-in Oscilloscope function,
After disconnecting the communication cable with the PC, the controller resumes The transmission by itself.Ли>
улей>
possibilities:
Reminder about the inspection of the gas installation
Preview of operating parameters on an oscilloscope
2D petrol injection Time map
Operation mode-CNG fuel
Engine RPM Signal filter
Working with different types of Injection control (standard, doubling)
Standard and turbo Engine type
Mazda ™ leaning
Extra-injection cut-off threshold
Embedded Gas temperature and pressure corrections
Gas injectors heating
Gas temperature correction map
Reducing the pressure of the reducer during cut-off (emptying)
Setting of the permissible number of emergency starts
Sound signaling informing about starting in safe mode
a warm start
Automatic setting of the gas Level indication
Option "leaning on a cold engine" - ограниченный the maximum injection time on a cold engine
Gas Pressure sensor error detection
Autocalibration - "all at once" option
Information about the car and gas installation
Petrol proportion (Petrol adding)
автоматическая регулировка множителя
Intelligent Post-injection control-this feature eliminates The need for the" mazda depletion " function known from stag300 controllers
Reading the RPM on the basis of petrol injection pulses
Detection of lack and overload of the solenoid valve
Injection sequence change options
Injector flow correction
Correction of the injectors ' opening time
Ignition switch Signal from Petrol injection pulses
Viber
Telegram
