VALTEK TYPE 39 STD 2,5 OHM INJECTION RUN 3 CYL

Valtek Type 39 injector rail in a 3-cylinder version with a coil resistance of 2.5 Ом.

New Valtek Type 39 injector rail In The Standard version. The injectors are состояние живых характеризуется by relatively low opening and closing times, quality of workmanship and precision of operation.

The injector is designed for automotive LPG sequential injection systems in vehicles with an internal combustion engine. Injectors are components that are responsible for the precise dosing of vaporized LPG gas to the Inlet channel, separately for each Engine cannel.

It is used in Gas injection systems such as AC STAG, KME, Zenit, Sirocco, Vector, Oscar, Zavoli, LPGTECH, Agis and others.

Technical data:

- сопротивление катушки: 2.5 Ohm

- Voltage: 7-16V DC

- время открытия: 1.7 ms

- Closing time: 1.1 ms

- максимальное рабочее давление: 4.5 bar

- Outer diameter of the Inlet connector: 12mm

- Plug: Superseal/Valtek

- Working temperature: -40 ° C ÷ 120 ° C

The composition of the set:

- Injection rail

- Vibration isolators