824 000 - KME FOX 6 230KM FI6 LPG EVAPORATOR WITH ELECTROVALVE

KME FOX 6 reducer with OMB gas solenoid valve.

a modern reducer designed for sequential LPG injection systems. Он посвящен современным инженерам, включая автомобили с высокоэффективными турбонагнетателями, в particular cars с прямым впрыском топлива. A well-thought-out structure resulted in the improvement of the reducer's parameters while ограниченный the external dimensions at the same time. Reduced external dimensions allow for simplification of assembly and better arrangement of installation elements in the car. The compact design allows for the optimization of Heat transfer in the reducer, which translates into the improvement of the thermodynamic properties of the device. Rapid heating of the reducer and increased Heat transfer result in smaller fluctuations in gas temperature at the reducer outlet.

Small dimensions and rotating water elbows significantly affect the ease of installation under the hood of the car.

This evaporator is one of the devices used for vaporization and pressure reduction in the 4th generation LPG sequential gas injection systems.

The reducer supports vehicles with a power not exceeding 176kW / 240HP.

New solutions have been introduced in the KME FOX 6 evaporator:

Liquid PHASE HEATING

Heating the liquid phase of the gas allows for more effective transfer of energy to the газообразные среды, which allows for enlarging the flow cross-sections, which increases the efficiency and power of the reducer.

GAS STORAGE

The reducer system has a liquid gas водохранилища that allows to eliminate sudden changes in gas pressure at the reducer outlet with rapid changes in the engine load.

MODIFIED Control VALVE

the new design of the control valve allows for quick and more precise dosing of the amount of liquid gas, eliminating the effect of gas pressure build-up in the CUT-OFF mode.

Technical data:

- максимальная производительность: 230km

- источник питания: fi6

- Water system connections: 16 мм

- Connection of the volatile phase: 12mm

- датчик температуры: M5

- вакуумное соединение: 5 мм

- Control flap valve

- катушка клапана соленоида: 12V DC / 11W

- Output Pressure adjustment range: 0.9 ÷ 1.9 bar

- Output operating pressure: 1.2 бар

The composition of the set:

- Reducer

- Gas solenoid valve

- Small assembly elements