3D-4CAM GEOMETRY ON a field

a device for measuring and adjusting the geometry of 3D motor vehicles. Device in 3D-4cam technology on a box. The set includes: a device for measuring The geometry on a box, a computer set with a printer and a cabinet, a set of turntables for the front axle, software and a vehicle database. Geometry sold only with the computer kit! Это основа для полного набора гарантий.

The price is for the purchase of one item of the offered product

A device for measuring and adjusting the geometry of 3D motor vehicles. Device in 3D-4cam technology on a box. The set includes: a device for measuring The geometry on a box, a computer set with a printer and a cabinet, a set of turntables for the front axle, software and a vehicle database. Geometry sold only with the computer kit! This is the basis for a complete kit warranty

Main advantages:

-the 4-Camera configuration is best for organizing canal and elevator work over the entire height range

- это выравнивание колес не требует калибровки и позволяет начать работу после установки.

устройство позволяет вам измерять следующие параметры

передний и задний мост:

- total and half alignment of the wheels

- camber angle

- wheel Displacement angle

- angles of the axis of симметрия and displacement of the axes and wheels in relation to the axis of симметрия

- steering angle of the Kingpin axis

- Sai / KPI Kingpin angle / lead angle

The functioning of the device is based on measuring the angular parameters determining the position of the axles and wheels of the car using 4 video cameras and flat discs in a checkerboard pattern and placing them in a 3-dimensional matrix.e. space.

The complete stand includes the following elements:

- Панель управления

- Эргономичная cupboard with hangers

2. Self-centering clamping arms

- Самоцентрирующееся крепление оружия подходит 12 "до 24" rims on passenger cars and vans

3. Клетчатые щиты

- Passive reflectors without electronic components consisting of planar plates

- Checkerboard pattern covered with a protective layer

- Ударопрочный

4. Vision system

различные конфигурации модульной системы позволяют вам выбрать оптимальную конфигурацию станции для конкретных требований заказчика.

There is a floor and wall Mount option, as well as a hoist or channel version. Система Geometry vision оснащена 4 сетевыми камерами с высоким разрешением. Данные передаются с камер на компьютер через протокол TCP / IP.

This обеспечивает широкий stereoscopic (spatial) measurement, состояние живых характеризуется by high accuracy and repeatability. The visual NIR (infrared) technology enables trouble-free measurements even in the most difficult environmental conditions in terms of lighting. Это не требует использования ламп и не отвлекает оператора от вспышки огней. Рабочий диапазон камер позволяет измерять и вычислять характерные углы машин на одной основе, а также проводить операции по лифту, без необходимости поднимать камеры устройства. Система автоматически распознает клетчатые диски на колесах автомобиля, а затем точно вычисляет их геометрическое положение в пространстве.

Exemplary intuitive interface in 3D animation visualizes the condition of the measured vehicle in real mode, facilitating the adjustment and observation of parameters.

Measured parameters can be displayed in many configurations and associations to facilitate the operator ' s work.

5. Database

the database is based on the two systems TechnoCar and Auto Data. It is and will be updated for lifetime TechnoVector 7 users at no extra charge.

Hints in the form of photos, videos and instructions are available at any time

The WideScope системы

The new "Wide" vision system provides a wide range of vehicle lifting heights up to 2 times more than similar third-party equipment.

система 4 камер позволяет вам принимать меры даже при высоте 1700 мм без необходимости перемещать камеры.

The minimal distance of the chessboard discs on the front wheels from the cross with cameras is 1200 mm.

The минимальная length requirement for the test stand is 6,550 мм.

Video cameras can be installed at a large distance from the measuring station. Это особенно important, когда камеры установлены на стене, когда latter is far from the workplace (3-4 м).

widescope technology improves stability

The device can still function even when the cameras are partially closed or the image of the measuring object has been повреждены!

Techno Vector 7 Geometry working range with 4 Camera system

The operating characteristics of the cameras are in the range of 1200-2550mm and 2550-3500 мм; if the distance is greater than 2550 mm, the measurement height increases.

Delivery range:

- Vision system (cross)

- Панель управления с монитором

- клавиатуры

- a PC with Windows 10

- маршрутизатор

- Color inkjet printer

- 4 discs with a checkerboard

- 4 колеса адаптеры

- brake locking device

- a device for locking the steering wheel

- Remote control receiver

- пульт дистанционного управления

- Инструкция

Technical characteristics:

- Voltage 230V

- Network frequency 50/60 Гц

- Wheel adapter (Mount arm), clamping range 12 ÷ 24 "

- рабочая температура +10 ÷ + 35 °?

- потребляемая мощность 350 Вт

- Net weight 280 кг

- Гросс вес 390 кг

- объем 1.7 m3

- Number of packages 7 pcs.

- ГОСТ certificate (certificate of quality and compliance with the standards and requirements of the Russian Federation-equivalent to CE, ISO and TUV-DIM, UkrSepro ...) ГОСТ 15150-69