2/45180 - НАКЛАДКА НА БАМПЕР SKODA OCTAVIA II УНИВЕРСАЛ 2004-12

2/45180 - НАКЛАДКА НА БАМПЕР SKODA OCTAVIA II УНИВЕРСАЛ 2004-12

Що Ви шукаєте?

Пошук
Розширений пошук
Переключити навігацію
Меню
Налаштування
Мова
UA
Валюта
грн
Аккаунт
Мій візок 0
Підібрати по VIN коду
RU
ПН-ПТ: 8:00 - 19:00
СБ-НД: 9:00 - 16:00

2/45180 - НАКЛАДКА НА БАМПЕР SKODA OCTAVIA II УНИВЕРСАЛ 2004-12

В наявності
Код товару:
11982072753
3102,00 грн
Додати до списку бажань Додати до порівняння
main product photo
+38 (095) 900-37-17
+38 (067) 900-37-17
Основні параметри
Докладніше
Стан Новий
Номер за каталогом 2/45180
Опис

BLACK BUMPER COVER WITH A BEND

SKODA OCTAVIA II COMBI год: 2004-2012

модель: 2/45180

Producer: Avisa

The avisa Rear bumper protector is the perfect solution for your car, because it has both a protective function and looks great as a decorative item. Установленная полоса устойчива к погодным условиям (температура -40 ° C / + 50 ° C) и посещает автомойку (влажность).

The standard in the strip is also the protection of the bumper edge through a specially profiled bend for this purpose.

All photos of the overlay presented at the auction are real photos, were made on the car for which the overlay was designed.
Overlay made of black / graphite stainless steel. Это была двусторонняя, очень сильная клейкая лента.

The covers are perfectly matched to a specific car model. устойчивость к разной погоде и дорожным условиям-влаге, песку, соли. Они являются оригинальными и элегантными дополнениями к любой машине.

Application and features of the rear bumper protective cover: <улей>
  • paint protection against mechanical damage and царапин resulting from loading / unloading luggage,
  • protection against weather conditions,
  • gives the car an exclusive character,
  • очень легко собрать. < / div >

    The overlay is attached with double-sided tape, which is located on all four edges of the slat. Attention!

    Attach the product carefully, as it will not be possible to improve the assembly once it has attached.

    After installing the cover, you can load and remove your luggage with confidence, and the scratched item is now covered with an exclusive accessory.

    You will receive the overlay in a sturdy package with step-by-step assembly instructions and a 3M обсаливая wipe.

    Installation instructions:
    1. Clean and degrease the surface with the 3M wipe provided
    2. Распаковки the overlay and read the attached manual
    3. Without removing the tape securing, try on and carefully mark the place of gluing in order to properly adjust it to the избранный place of installation
    4. Peel off The foil securing the double-sided tape
    5. применить полосу к previously marked place, starting from the top edge
    6. Press The strip down carefully over the entire surface
    7. Ready

    * photos of a different overlay model were used in the manual

    • Scroll To Top